123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190 |
- /*
- * Virtio Network Device
- *
- * Copyright IBM, Corp. 2007
- *
- * Authors:
- * Anthony Liguori <aliguori@us.ibm.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2. See
- * the COPYING file in the top-level directory.
- *
- */
- #ifndef _QEMU_VIRTIO_NET_H
- #define _QEMU_VIRTIO_NET_H
- #include "virtio.h"
- #include "net.h"
- #include "pci/pci.h"
- #define ETH_ALEN 6
- /* from Linux's virtio_net.h */
- /* The ID for virtio_net */
- #define VIRTIO_ID_NET 1
- /* The feature bitmap for virtio net */
- #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
- #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
- #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
- #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
- #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
- #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
- #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
- #define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
- #define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
- #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
- #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
- #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
- #define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
- #define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
- #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
- #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
- #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
- #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
- #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
- #define TX_TIMER_INTERVAL 150000 /* 150 us */
- /* Limit the number of packets that can be sent via a single flush
- * of the TX queue. This gives us a guaranteed exit condition and
- * ensures fairness in the io path. 256 conveniently matches the
- * length of the TX queue and shows a good balance of performance
- * and latency. */
- #define TX_BURST 256
- typedef struct virtio_net_conf
- {
- uint32_t txtimer;
- int32_t txburst;
- char *tx;
- } virtio_net_conf;
- /* Maximum packet size we can receive from tap device: header + 64k */
- #define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
- struct virtio_net_config
- {
- /* The config defining mac address ($ETH_ALEN bytes) */
- uint8_t mac[ETH_ALEN];
- /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
- uint16_t status;
- } QEMU_PACKED;
- /* This is the first element of the scatter-gather list. If you don't
- * specify GSO or CSUM features, you can simply ignore the header. */
- struct virtio_net_hdr
- {
- #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
- #define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid
- uint8_t flags;
- #define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
- #define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
- #define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO)
- #define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP
- #define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
- uint8_t gso_type;
- uint16_t hdr_len;
- uint16_t gso_size;
- uint16_t csum_start;
- uint16_t csum_offset;
- };
- /* This is the version of the header to use when the MRG_RXBUF
- * feature has been negotiated. */
- struct virtio_net_hdr_mrg_rxbuf
- {
- struct virtio_net_hdr hdr;
- uint16_t num_buffers; /* Number of merged rx buffers */
- };
- /*
- * Control virtqueue data structures
- *
- * The control virtqueue expects a header in the first sg entry
- * and an ack/status response in the last entry. Data for the
- * command goes in between.
- */
- struct virtio_net_ctrl_hdr {
- uint8_t class;
- uint8_t cmd;
- };
- typedef uint8_t virtio_net_ctrl_ack;
- #define VIRTIO_NET_OK 0
- #define VIRTIO_NET_ERR 1
- /*
- * Control the RX mode, ie. promisucous, allmulti, etc...
- * All commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable. Commands
- * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
- * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
- */
- #define VIRTIO_NET_CTRL_RX_MODE 0
- #define VIRTIO_NET_CTRL_RX_MODE_PROMISC 0
- #define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI 1
- #define VIRTIO_NET_CTRL_RX_MODE_ALLUNI 2
- #define VIRTIO_NET_CTRL_RX_MODE_NOMULTI 3
- #define VIRTIO_NET_CTRL_RX_MODE_NOUNI 4
- #define VIRTIO_NET_CTRL_RX_MODE_NOBCAST 5
- /*
- * Control the MAC filter table.
- *
- * The MAC filter table is managed by the hypervisor, the guest should
- * assume the size is infinite. Filtering should be considered
- * non-perfect, ie. based on hypervisor resources, the guest may
- * received packets from sources not specified in the filter list.
- *
- * In addition to the class/cmd header, the TABLE_SET command requires
- * two out scatterlists. Each contains a 4 byte count of entries followed
- * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
- * first sg list contains unicast addresses, the second is for multicast.
- * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
- * is available.
- */
- struct virtio_net_ctrl_mac {
- uint32_t entries;
- uint8_t macs[][ETH_ALEN];
- };
- #define VIRTIO_NET_CTRL_MAC 1
- #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
- /*
- * Control VLAN filtering
- *
- * The VLAN filter table is controlled via a simple ADD/DEL interface.
- * VLAN IDs not added may be filterd by the hypervisor. Del is the
- * opposite of add. Both commands expect an out entry containing a 2
- * byte VLAN ID. VLAN filterting is available with the
- * VIRTIO_NET_F_CTRL_VLAN feature bit.
- */
- #define VIRTIO_NET_CTRL_VLAN 2
- #define VIRTIO_NET_CTRL_VLAN_ADD 0
- #define VIRTIO_NET_CTRL_VLAN_DEL 1
- #define DEFINE_VIRTIO_NET_FEATURES(_state, _field) \
- DEFINE_VIRTIO_COMMON_FEATURES(_state, _field), \
- DEFINE_PROP_BIT("csum", _state, _field, VIRTIO_NET_F_CSUM, true), \
- DEFINE_PROP_BIT("guest_csum", _state, _field, VIRTIO_NET_F_GUEST_CSUM, true), \
- DEFINE_PROP_BIT("gso", _state, _field, VIRTIO_NET_F_GSO, true), \
- DEFINE_PROP_BIT("guest_tso4", _state, _field, VIRTIO_NET_F_GUEST_TSO4, true), \
- DEFINE_PROP_BIT("guest_tso6", _state, _field, VIRTIO_NET_F_GUEST_TSO6, true), \
- DEFINE_PROP_BIT("guest_ecn", _state, _field, VIRTIO_NET_F_GUEST_ECN, true), \
- DEFINE_PROP_BIT("guest_ufo", _state, _field, VIRTIO_NET_F_GUEST_UFO, true), \
- DEFINE_PROP_BIT("host_tso4", _state, _field, VIRTIO_NET_F_HOST_TSO4, true), \
- DEFINE_PROP_BIT("host_tso6", _state, _field, VIRTIO_NET_F_HOST_TSO6, true), \
- DEFINE_PROP_BIT("host_ecn", _state, _field, VIRTIO_NET_F_HOST_ECN, true), \
- DEFINE_PROP_BIT("host_ufo", _state, _field, VIRTIO_NET_F_HOST_UFO, true), \
- DEFINE_PROP_BIT("mrg_rxbuf", _state, _field, VIRTIO_NET_F_MRG_RXBUF, true), \
- DEFINE_PROP_BIT("status", _state, _field, VIRTIO_NET_F_STATUS, true), \
- DEFINE_PROP_BIT("ctrl_vq", _state, _field, VIRTIO_NET_F_CTRL_VQ, true), \
- DEFINE_PROP_BIT("ctrl_rx", _state, _field, VIRTIO_NET_F_CTRL_RX, true), \
- DEFINE_PROP_BIT("ctrl_vlan", _state, _field, VIRTIO_NET_F_CTRL_VLAN, true), \
- DEFINE_PROP_BIT("ctrl_rx_extra", _state, _field, VIRTIO_NET_F_CTRL_RX_EXTRA, true)
- #endif
|