Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging

# gpg: Signature made Thu 27 Oct 2016 22:15:57 BST
# gpg:                using RSA key 0x7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# Primary key fingerprint: FAEB 9711 A12C F475 812F  18F2 88A9 064D 1835 61EB
#      Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76  CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/ide-pull-request:
  qemu-iotests: Test creating floppy drives
  fdc: Move qdev properties to FloppyDrive
  fdc: Add a floppy drive qdev
  fdc: Add a floppy qbus
  macio: switch over to new byte-aligned DMA helpers
  dma-helpers: explicitly pass alignment into DMA helpers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

dma-helpers.c

@@ -73,6 +73,7 @@ typedef struct {
     AioContext *ctx;
     BlockAIOCB *acb;
     QEMUSGList *sg;
+    uint32_t align;
     uint64_t offset;
     DMADirection dir;
     int sg_cur_index;
@@ -160,8 +161,9 @@ static void dma_blk_cb(void *opaque, int ret)
         return;
     }
 
-    if (dbs->iov.size & ~BDRV_SECTOR_MASK) {
-        qemu_iovec_discard_back(&dbs->iov, dbs->iov.size & ~BDRV_SECTOR_MASK);
+    if (!QEMU_IS_ALIGNED(dbs->iov.size, dbs->align)) {
+        qemu_iovec_discard_back(&dbs->iov,
+                                QEMU_ALIGN_DOWN(dbs->iov.size, dbs->align));
     }
 
     dbs->acb = dbs->io_func(dbs->offset, &dbs->iov,
@@ -199,7 +201,7 @@ static const AIOCBInfo dma_aiocb_info = {
 };
 
 BlockAIOCB *dma_blk_io(AioContext *ctx,
-    QEMUSGList *sg, uint64_t offset,
+    QEMUSGList *sg, uint64_t offset, uint32_t align,
     DMAIOFunc *io_func, void *io_func_opaque,
     BlockCompletionFunc *cb,
     void *opaque, DMADirection dir)
@@ -212,6 +214,7 @@ BlockAIOCB *dma_blk_io(AioContext *ctx,
     dbs->sg = sg;
     dbs->ctx = ctx;
     dbs->offset = offset;
+    dbs->align = align;
     dbs->sg_cur_index = 0;
     dbs->sg_cur_byte = 0;
     dbs->dir = dir;
@@ -234,11 +237,11 @@ BlockAIOCB *dma_blk_read_io_func(int64_t offset, QEMUIOVector *iov,
 }
 
 BlockAIOCB *dma_blk_read(BlockBackend *blk,
-                         QEMUSGList *sg, uint64_t offset,
+                         QEMUSGList *sg, uint64_t offset, uint32_t align,
                          void (*cb)(void *opaque, int ret), void *opaque)
 {
-    return dma_blk_io(blk_get_aio_context(blk),
-                      sg, offset, dma_blk_read_io_func, blk, cb, opaque,
+    return dma_blk_io(blk_get_aio_context(blk), sg, offset, align,
+                      dma_blk_read_io_func, blk, cb, opaque,
                       DMA_DIRECTION_FROM_DEVICE);
 }
 
@@ -252,11 +255,11 @@ BlockAIOCB *dma_blk_write_io_func(int64_t offset, QEMUIOVector *iov,
 }
 
 BlockAIOCB *dma_blk_write(BlockBackend *blk,
-                          QEMUSGList *sg, uint64_t offset,
+                          QEMUSGList *sg, uint64_t offset, uint32_t align,
                           void (*cb)(void *opaque, int ret), void *opaque)
 {
-    return dma_blk_io(blk_get_aio_context(blk),
-                      sg, offset, dma_blk_write_io_func, blk, cb, opaque,
+    return dma_blk_io(blk_get_aio_context(blk), sg, offset, align,
+                      dma_blk_write_io_func, blk, cb, opaque,
                       DMA_DIRECTION_TO_DEVICE);
 }
 

hw/block/fdc.c

@@ -35,6 +35,7 @@
 #include "qemu/timer.h"
 #include "hw/isa/isa.h"
 #include "hw/sysbus.h"
+#include "hw/block/block.h"
 #include "sysemu/block-backend.h"
 #include "sysemu/blockdev.h"
 #include "sysemu/sysemu.h"
@@ -52,6 +53,35 @@
         }                                                       \
     } while (0)
 
+
+/********************************************************/
+/* qdev floppy bus                                      */
+
+#define TYPE_FLOPPY_BUS "floppy-bus"
+#define FLOPPY_BUS(obj) OBJECT_CHECK(FloppyBus, (obj), TYPE_FLOPPY_BUS)
+
+typedef struct FDCtrl FDCtrl;
+typedef struct FDrive FDrive;
+static FDrive *get_drv(FDCtrl *fdctrl, int unit);
+
+typedef struct FloppyBus {
+    BusState bus;
+    FDCtrl *fdc;
+} FloppyBus;
+
+static const TypeInfo floppy_bus_info = {
+    .name = TYPE_FLOPPY_BUS,
+    .parent = TYPE_BUS,
+    .instance_size = sizeof(FloppyBus),
+};
+
+static void floppy_bus_create(FDCtrl *fdc, FloppyBus *bus, DeviceState *dev)
+{
+    qbus_create_inplace(bus, sizeof(FloppyBus), TYPE_FLOPPY_BUS, dev, NULL);
+    bus->fdc = fdc;
+}
+
+
 /********************************************************/
 /* Floppy drive emulation                               */
 
@@ -148,14 +178,12 @@ static FDriveSize drive_size(FloppyDriveType drive)
 #define FD_SECTOR_SC           2   /* Sector size code */
 #define FD_RESET_SENSEI_COUNT  4   /* Number of sense interrupts on RESET */
 
-typedef struct FDCtrl FDCtrl;
-
 /* Floppy disk drive emulation */
 typedef enum FDiskFlags {
     FDISK_DBL_SIDES  = 0x01,
 } FDiskFlags;
 
-typedef struct FDrive {
+struct FDrive {
     FDCtrl *fdctrl;
     BlockBackend *blk;
     /* Drive status */
@@ -176,7 +204,7 @@ typedef struct FDrive {
     uint8_t media_rate;       /* Data rate of medium    */
 
     bool media_validated;     /* Have we validated the media? */
-} FDrive;
+};
 
 
 static FloppyDriveType get_fallback_drive_type(FDrive *drv);
@@ -441,6 +469,135 @@ static void fd_revalidate(FDrive *drv)
     }
 }
 
+static void fd_change_cb(void *opaque, bool load)
+{
+    FDrive *drive = opaque;
+
+    drive->media_changed = 1;
+    drive->media_validated = false;
+    fd_revalidate(drive);
+}
+
+static const BlockDevOps fd_block_ops = {
+    .change_media_cb = fd_change_cb,
+};
+
+
+#define TYPE_FLOPPY_DRIVE "floppy"
+#define FLOPPY_DRIVE(obj) \
+     OBJECT_CHECK(FloppyDrive, (obj), TYPE_FLOPPY_DRIVE)
+
+typedef struct FloppyDrive {
+    DeviceState     qdev;
+    uint32_t        unit;
+    BlockConf       conf;
+    FloppyDriveType type;
+} FloppyDrive;
+
+static Property floppy_drive_properties[] = {
+    DEFINE_PROP_UINT32("unit", FloppyDrive, unit, -1),
+    DEFINE_BLOCK_PROPERTIES(FloppyDrive, conf),
+    DEFINE_PROP_DEFAULT("drive-type", FloppyDrive, type,
+                        FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
+                        FloppyDriveType),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static int floppy_drive_init(DeviceState *qdev)
+{
+    FloppyDrive *dev = FLOPPY_DRIVE(qdev);
+    FloppyBus *bus = FLOPPY_BUS(qdev->parent_bus);
+    FDrive *drive;
+    int ret;
+
+    if (dev->unit == -1) {
+        for (dev->unit = 0; dev->unit < MAX_FD; dev->unit++) {
+            drive = get_drv(bus->fdc, dev->unit);
+            if (!drive->blk) {
+                break;
+            }
+        }
+    }
+
+    if (dev->unit >= MAX_FD) {
+        error_report("Can't create floppy unit %d, bus supports only %d units",
+                     dev->unit, MAX_FD);
+        return -1;
+    }
+
+    drive = get_drv(bus->fdc, dev->unit);
+    if (drive->blk) {
+        error_report("Floppy unit %d is in use", dev->unit);
+        return -1;
+    }
+
+    if (!dev->conf.blk) {
+        /* Anonymous BlockBackend for an empty drive */
+        dev->conf.blk = blk_new();
+        ret = blk_attach_dev(dev->conf.blk, qdev);
+        assert(ret == 0);
+    }
+
+    blkconf_blocksizes(&dev->conf);
+    if (dev->conf.logical_block_size != 512 ||
+        dev->conf.physical_block_size != 512)
+    {
+        error_report("Physical and logical block size must be 512 for floppy");
+        return -1;
+    }
+
+    /* rerror/werror aren't supported by fdc and therefore not even registered
+     * with qdev. So set the defaults manually before they are used in
+     * blkconf_apply_backend_options(). */
+    dev->conf.rerror = BLOCKDEV_ON_ERROR_AUTO;
+    dev->conf.werror = BLOCKDEV_ON_ERROR_AUTO;
+    blkconf_apply_backend_options(&dev->conf);
+
+    /* 'enospc' is the default for -drive, 'report' is what blk_new() gives us
+     * for empty drives. */
+    if (blk_get_on_error(dev->conf.blk, 0) != BLOCKDEV_ON_ERROR_ENOSPC &&
+        blk_get_on_error(dev->conf.blk, 0) != BLOCKDEV_ON_ERROR_REPORT) {
+        error_report("fdc doesn't support drive option werror");
+        return -1;
+    }
+    if (blk_get_on_error(dev->conf.blk, 1) != BLOCKDEV_ON_ERROR_REPORT) {
+        error_report("fdc doesn't support drive option rerror");
+        return -1;
+    }
+
+    drive->blk = dev->conf.blk;
+    drive->fdctrl = bus->fdc;
+
+    fd_init(drive);
+    blk_set_dev_ops(drive->blk, &fd_block_ops, drive);
+
+    /* Keep 'type' qdev property and FDrive->drive in sync */
+    drive->drive = dev->type;
+    pick_drive_type(drive);
+    dev->type = drive->drive;
+
+    fd_revalidate(drive);
+
+    return 0;
+}
+
+static void floppy_drive_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *k = DEVICE_CLASS(klass);
+    k->init = floppy_drive_init;
+    set_bit(DEVICE_CATEGORY_STORAGE, k->categories);
+    k->bus_type = TYPE_FLOPPY_BUS;
+    k->props = floppy_drive_properties;
+    k->desc = "virtual floppy drive";
+}
+
+static const TypeInfo floppy_drive_info = {
+    .name = TYPE_FLOPPY_DRIVE,
+    .parent = TYPE_DEVICE,
+    .instance_size = sizeof(FloppyDrive),
+    .class_init = floppy_drive_class_init,
+};
+
 /********************************************************/
 /* Intel 82078 floppy disk controller emulation          */
 
@@ -684,8 +841,13 @@ struct FDCtrl {
     /* Power down config (also with status regB access mode */
     uint8_t pwrd;
     /* Floppy drives */
+    FloppyBus bus;
     uint8_t num_floppies;
     FDrive drives[MAX_FD];
+    struct {
+        BlockBackend *blk;
+        FloppyDriveType type;
+    } qdev_for_drives[MAX_FD];
     int reset_sensei;
     uint32_t check_media_rate;
     FloppyDriveType fallback; /* type=auto failure fallback */
@@ -1159,9 +1321,9 @@ static inline FDrive *drv3(FDCtrl *fdctrl)
 }
 #endif
 
-static FDrive *get_cur_drv(FDCtrl *fdctrl)
+static FDrive *get_drv(FDCtrl *fdctrl, int unit)
 {
-    switch (fdctrl->cur_drv) {
+    switch (unit) {
         case 0: return drv0(fdctrl);
         case 1: return drv1(fdctrl);
 #if MAX_FD == 4
@@ -1172,6 +1334,11 @@ static FDrive *get_cur_drv(FDCtrl *fdctrl)
     }
 }
 
+static FDrive *get_cur_drv(FDCtrl *fdctrl)
+{
+    return get_drv(fdctrl, fdctrl->cur_drv);
+}
+
 /* Status A register : 0x00 (read-only) */
 static uint32_t fdctrl_read_statusA(FDCtrl *fdctrl)
 {
@@ -2331,46 +2498,49 @@ static void fdctrl_result_timer(void *opaque)
     }
 }
 
-static void fdctrl_change_cb(void *opaque, bool load)
-{
-    FDrive *drive = opaque;
-
-    drive->media_changed = 1;
-    drive->media_validated = false;
-    fd_revalidate(drive);
-}
-
-static const BlockDevOps fdctrl_block_ops = {
-    .change_media_cb = fdctrl_change_cb,
-};
-
 /* Init functions */
-static void fdctrl_connect_drives(FDCtrl *fdctrl, Error **errp)
+static void fdctrl_connect_drives(FDCtrl *fdctrl, Error **errp,
+                                  DeviceState *fdc_dev)
 {
     unsigned int i;
     FDrive *drive;
+    DeviceState *dev;
+    BlockBackend *blk;
+    Error *local_err = NULL;
 
     for (i = 0; i < MAX_FD; i++) {
         drive = &fdctrl->drives[i];
         drive->fdctrl = fdctrl;
 
-        if (drive->blk) {
-            if (blk_get_on_error(drive->blk, 0) != BLOCKDEV_ON_ERROR_ENOSPC) {
-                error_setg(errp, "fdc doesn't support drive option werror");
-                return;
-            }
-            if (blk_get_on_error(drive->blk, 1) != BLOCKDEV_ON_ERROR_REPORT) {
-                error_setg(errp, "fdc doesn't support drive option rerror");
-                return;
-            }
+        /* If the drive is not present, we skip creating the qdev device, but
+         * still have to initialise the controller. */
+        blk = fdctrl->qdev_for_drives[i].blk;
+        if (!blk) {
+            fd_init(drive);
+            fd_revalidate(drive);
+            continue;
+        }
+
+        dev = qdev_create(&fdctrl->bus.bus, "floppy");
+        qdev_prop_set_uint32(dev, "unit", i);
+        qdev_prop_set_enum(dev, "drive-type", fdctrl->qdev_for_drives[i].type);
+
+        blk_ref(blk);
+        blk_detach_dev(blk, fdc_dev);
+        fdctrl->qdev_for_drives[i].blk = NULL;
+        qdev_prop_set_drive(dev, "drive", blk, &local_err);
+        blk_unref(blk);
+
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
         }
 
-        fd_init(drive);
-        if (drive->blk) {
-            blk_set_dev_ops(drive->blk, &fdctrl_block_ops, drive);
-            pick_drive_type(drive);
+        object_property_set_bool(OBJECT(dev), true, "realized", &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
         }
-        fd_revalidate(drive);
     }
 }
 
@@ -2442,7 +2612,8 @@ void sun4m_fdctrl_init(qemu_irq irq, hwaddr io_base,
     *fdc_tc = qdev_get_gpio_in(dev, 0);
 }
 
-static void fdctrl_realize_common(FDCtrl *fdctrl, Error **errp)
+static void fdctrl_realize_common(DeviceState *dev, FDCtrl *fdctrl,
+                                  Error **errp)
 {
     int i, j;
     static int command_tables_inited = 0;
@@ -2480,7 +2651,9 @@ static void fdctrl_realize_common(FDCtrl *fdctrl, Error **errp)
         k->register_channel(fdctrl->dma, fdctrl->dma_chann,
                             &fdctrl_transfer_handler, fdctrl);
     }
-    fdctrl_connect_drives(fdctrl, errp);
+
+    floppy_bus_create(fdctrl, &fdctrl->bus, dev);
+    fdctrl_connect_drives(fdctrl, errp, dev);
 }
 
 static const MemoryRegionPortio fdc_portio_list[] = {
@@ -2508,7 +2681,7 @@ static void isabus_fdc_realize(DeviceState *dev, Error **errp)
     }
 
     qdev_set_legacy_instance_id(dev, isa->iobase, 2);
-    fdctrl_realize_common(fdctrl, &err);
+    fdctrl_realize_common(dev, fdctrl, &err);
     if (err != NULL) {
         error_propagate(errp, err);
         return;
@@ -2559,7 +2732,7 @@ static void sysbus_fdc_common_realize(DeviceState *dev, Error **errp)
     FDCtrlSysBus *sys = SYSBUS_FDC(dev);
     FDCtrl *fdctrl = &sys->state;
 
-    fdctrl_realize_common(fdctrl, errp);
+    fdctrl_realize_common(dev, fdctrl, errp);
 }
 
 FloppyDriveType isa_fdc_get_drive_type(ISADevice *fdc, int i)
@@ -2606,14 +2779,14 @@ static Property isa_fdc_properties[] = {
     DEFINE_PROP_UINT32("iobase", FDCtrlISABus, iobase, 0x3f0),
     DEFINE_PROP_UINT32("irq", FDCtrlISABus, irq, 6),
     DEFINE_PROP_UINT32("dma", FDCtrlISABus, dma, 2),
-    DEFINE_PROP_DRIVE("driveA", FDCtrlISABus, state.drives[0].blk),
-    DEFINE_PROP_DRIVE("driveB", FDCtrlISABus, state.drives[1].blk),
+    DEFINE_PROP_DRIVE("driveA", FDCtrlISABus, state.qdev_for_drives[0].blk),
+    DEFINE_PROP_DRIVE("driveB", FDCtrlISABus, state.qdev_for_drives[1].blk),
     DEFINE_PROP_BIT("check_media_rate", FDCtrlISABus, state.check_media_rate,
                     0, true),
-    DEFINE_PROP_DEFAULT("fdtypeA", FDCtrlISABus, state.drives[0].drive,
+    DEFINE_PROP_DEFAULT("fdtypeA", FDCtrlISABus, state.qdev_for_drives[0].type,
                         FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
                         FloppyDriveType),
-    DEFINE_PROP_DEFAULT("fdtypeB", FDCtrlISABus, state.drives[1].drive,
+    DEFINE_PROP_DEFAULT("fdtypeB", FDCtrlISABus, state.qdev_for_drives[1].type,
                         FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
                         FloppyDriveType),
     DEFINE_PROP_DEFAULT("fallback", FDCtrlISABus, state.fallback,
@@ -2665,12 +2838,12 @@ static const VMStateDescription vmstate_sysbus_fdc ={
 };
 
 static Property sysbus_fdc_properties[] = {
-    DEFINE_PROP_DRIVE("driveA", FDCtrlSysBus, state.drives[0].blk),
-    DEFINE_PROP_DRIVE("driveB", FDCtrlSysBus, state.drives[1].blk),
-    DEFINE_PROP_DEFAULT("fdtypeA", FDCtrlSysBus, state.drives[0].drive,
+    DEFINE_PROP_DRIVE("driveA", FDCtrlSysBus, state.qdev_for_drives[0].blk),
+    DEFINE_PROP_DRIVE("driveB", FDCtrlSysBus, state.qdev_for_drives[1].blk),
+    DEFINE_PROP_DEFAULT("fdtypeA", FDCtrlSysBus, state.qdev_for_drives[0].type,
                         FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
                         FloppyDriveType),
-    DEFINE_PROP_DEFAULT("fdtypeB", FDCtrlSysBus, state.drives[1].drive,
+    DEFINE_PROP_DEFAULT("fdtypeB", FDCtrlSysBus, state.qdev_for_drives[1].type,
                         FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
                         FloppyDriveType),
     DEFINE_PROP_DEFAULT("fallback", FDCtrlISABus, state.fallback,
@@ -2695,8 +2868,8 @@ static const TypeInfo sysbus_fdc_info = {
 };
 
 static Property sun4m_fdc_properties[] = {
-    DEFINE_PROP_DRIVE("drive", FDCtrlSysBus, state.drives[0].blk),
-    DEFINE_PROP_DEFAULT("fdtype", FDCtrlSysBus, state.drives[0].drive,
+    DEFINE_PROP_DRIVE("drive", FDCtrlSysBus, state.qdev_for_drives[0].blk),
+    DEFINE_PROP_DEFAULT("fdtype", FDCtrlSysBus, state.qdev_for_drives[0].type,
                         FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
                         FloppyDriveType),
     DEFINE_PROP_DEFAULT("fallback", FDCtrlISABus, state.fallback,
@@ -2744,6 +2917,8 @@ static void fdc_register_types(void)
     type_register_static(&sysbus_fdc_type_info);
     type_register_static(&sysbus_fdc_info);
     type_register_static(&sun4m_fdc_info);
+    type_register_static(&floppy_bus_info);
+    type_register_static(&floppy_drive_info);
 }
 
 type_init(fdc_register_types)

hw/block/nvme.c

@@ -258,8 +258,10 @@ static uint16_t nvme_rw(NvmeCtrl *n, NvmeNamespace *ns, NvmeCmd *cmd,
     req->has_sg = true;
     dma_acct_start(n->conf.blk, &req->acct, &req->qsg, acct);
     req->aiocb = is_write ?
-        dma_blk_write(n->conf.blk, &req->qsg, data_offset, nvme_rw_cb, req) :
-        dma_blk_read(n->conf.blk, &req->qsg, data_offset, nvme_rw_cb, req);
+        dma_blk_write(n->conf.blk, &req->qsg, data_offset, BDRV_SECTOR_SIZE,
+                      nvme_rw_cb, req) :
+        dma_blk_read(n->conf.blk, &req->qsg, data_offset, BDRV_SECTOR_SIZE,
+                     nvme_rw_cb, req);
 
     return NVME_NO_COMPLETE;
 }

hw/ide/ahci.c

@@ -1009,6 +1009,7 @@ static void execute_ncq_command(NCQTransferState *ncq_tfs)
                        &ncq_tfs->sglist, BLOCK_ACCT_READ);
         ncq_tfs->aiocb = dma_blk_read(ide_state->blk, &ncq_tfs->sglist,
                                       ncq_tfs->lba << BDRV_SECTOR_BITS,
+                                      BDRV_SECTOR_SIZE,
                                       ncq_cb, ncq_tfs);
         break;
     case WRITE_FPDMA_QUEUED:
@@ -1022,6 +1023,7 @@ static void execute_ncq_command(NCQTransferState *ncq_tfs)
                        &ncq_tfs->sglist, BLOCK_ACCT_WRITE);
         ncq_tfs->aiocb = dma_blk_write(ide_state->blk, &ncq_tfs->sglist,
                                        ncq_tfs->lba << BDRV_SECTOR_BITS,
+                                       BDRV_SECTOR_SIZE,
                                        ncq_cb, ncq_tfs);
         break;
     default:

hw/ide/core.c

@@ -882,15 +882,15 @@ static void ide_dma_cb(void *opaque, int ret)
     switch (s->dma_cmd) {
     case IDE_DMA_READ:
         s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset,
-                                          ide_dma_cb, s);
+                                          BDRV_SECTOR_SIZE, ide_dma_cb, s);
         break;
     case IDE_DMA_WRITE:
         s->bus->dma->aiocb = dma_blk_write(s->blk, &s->sg, offset,
-                                           ide_dma_cb, s);
+                                           BDRV_SECTOR_SIZE, ide_dma_cb, s);
         break;
     case IDE_DMA_TRIM:
         s->bus->dma->aiocb = dma_blk_io(blk_get_aio_context(s->blk),
-                                        &s->sg, offset,
+                                        &s->sg, offset, BDRV_SECTOR_SIZE,
                                         ide_issue_trim, s->blk, ide_dma_cb, s,
                                         DMA_DIRECTION_TO_DEVICE);
         break;

hw/ide/macio.c

@@ -52,187 +52,6 @@ static const int debug_macio = 0;
 
 #define MACIO_PAGE_SIZE 4096
 
-/*
- * Unaligned DMA read/write access functions required for OS X/Darwin which
- * don't perform DMA transactions on sector boundaries. These functions are
- * modelled on bdrv_co_preadv()/bdrv_co_pwritev() and so should be easy to
- * remove if the unaligned block APIs are ever exposed.
- */
-
-static void pmac_dma_read(BlockBackend *blk,
-                          int64_t offset, unsigned int bytes,
-                          void (*cb)(void *opaque, int ret), void *opaque)
-{
-    DBDMA_io *io = opaque;
-    MACIOIDEState *m = io->opaque;
-    IDEState *s = idebus_active_if(&m->bus);
-    dma_addr_t dma_addr;
-    int64_t sector_num;
-    int nsector;
-    uint64_t align = BDRV_SECTOR_SIZE;
-    size_t head_bytes, tail_bytes;
-
-    qemu_iovec_destroy(&io->iov);
-    qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1);
-
-    sector_num = (offset >> 9);
-    nsector = (io->len >> 9);
-
-    MACIO_DPRINTF("--- DMA read transfer (0x%" HWADDR_PRIx ",0x%x): "
-                  "sector_num: %" PRId64 ", nsector: %d\n", io->addr, io->len,
-                  sector_num, nsector);
-
-    dma_addr = io->addr;
-    io->dir = DMA_DIRECTION_FROM_DEVICE;
-    io->dma_len = io->len;
-    io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len,
-                                 io->dir);
-
-    if (offset & (align - 1)) {
-        head_bytes = offset & (align - 1);
-
-        MACIO_DPRINTF("--- DMA unaligned head: sector %" PRId64 ", "
-                      "discarding %zu bytes\n", sector_num, head_bytes);
-
-        qemu_iovec_add(&io->iov, &io->head_remainder, head_bytes);
-
-        bytes += offset & (align - 1);
-        offset = offset & ~(align - 1);
-    }
-
-    qemu_iovec_add(&io->iov, io->dma_mem, io->len);
-
-    if ((offset + bytes) & (align - 1)) {
-        tail_bytes = (offset + bytes) & (align - 1);
-
-        MACIO_DPRINTF("--- DMA unaligned tail: sector %" PRId64 ", "
-                      "discarding bytes %zu\n", sector_num, tail_bytes);
-
-        qemu_iovec_add(&io->iov, &io->tail_remainder, align - tail_bytes);
-        bytes = ROUND_UP(bytes, align);
-    }
-
-    s->io_buffer_size -= io->len;
-    s->io_buffer_index += io->len;
-
-    io->len = 0;
-
-    MACIO_DPRINTF("--- Block read transfer - sector_num: %" PRIx64 "  "
-                  "nsector: %x\n", (offset >> 9), (bytes >> 9));
-
-    s->bus->dma->aiocb = blk_aio_preadv(blk, offset, &io->iov, 0, cb, io);
-}
-
-static void pmac_dma_write(BlockBackend *blk,
-                         int64_t offset, int bytes,
-                         void (*cb)(void *opaque, int ret), void *opaque)
-{
-    DBDMA_io *io = opaque;
-    MACIOIDEState *m = io->opaque;
-    IDEState *s = idebus_active_if(&m->bus);
-    dma_addr_t dma_addr;
-    int64_t sector_num;
-    int nsector;
-    uint64_t align = BDRV_SECTOR_SIZE;
-    size_t head_bytes, tail_bytes;
-    bool unaligned_head = false, unaligned_tail = false;
-
-    qemu_iovec_destroy(&io->iov);
-    qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1);
-
-    sector_num = (offset >> 9);
-    nsector = (io->len >> 9);
-
-    MACIO_DPRINTF("--- DMA write transfer (0x%" HWADDR_PRIx ",0x%x): "
-                  "sector_num: %" PRId64 ", nsector: %d\n", io->addr, io->len,
-                  sector_num, nsector);
-
-    dma_addr = io->addr;
-    io->dir = DMA_DIRECTION_TO_DEVICE;
-    io->dma_len = io->len;
-    io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len,
-                                 io->dir);
-
-    if (offset & (align - 1)) {
-        head_bytes = offset & (align - 1);
-        sector_num = ((offset & ~(align - 1)) >> 9);
-
-        MACIO_DPRINTF("--- DMA unaligned head: pre-reading head sector %"
-                      PRId64 "\n", sector_num);
-
-        blk_pread(s->blk, (sector_num << 9), &io->head_remainder, align);
-
-        qemu_iovec_add(&io->iov, &io->head_remainder, head_bytes);
-        qemu_iovec_add(&io->iov, io->dma_mem, io->len);
-
-        bytes += offset & (align - 1);
-        offset = offset & ~(align - 1);
-
-        unaligned_head = true;
-    }
-
-    if ((offset + bytes) & (align - 1)) {
-        tail_bytes = (offset + bytes) & (align - 1);
-        sector_num = (((offset + bytes) & ~(align - 1)) >> 9);
-
-        MACIO_DPRINTF("--- DMA unaligned tail: pre-reading tail sector %"
-                      PRId64 "\n", sector_num);
-
-        blk_pread(s->blk, (sector_num << 9), &io->tail_remainder, align);
-
-        if (!unaligned_head) {
-            qemu_iovec_add(&io->iov, io->dma_mem, io->len);
-        }
-
-        qemu_iovec_add(&io->iov, &io->tail_remainder + tail_bytes,
-                       align - tail_bytes);
-
-        bytes = ROUND_UP(bytes, align);
-
-        unaligned_tail = true;
-    }
-
-    if (!unaligned_head && !unaligned_tail) {
-        qemu_iovec_add(&io->iov, io->dma_mem, io->len);
-    }
-
-    s->io_buffer_size -= io->len;
-    s->io_buffer_index += io->len;
-
-    io->len = 0;
-
-    MACIO_DPRINTF("--- Block write transfer - sector_num: %" PRIx64 "  "
-                  "nsector: %x\n", (offset >> 9), (bytes >> 9));
-
-    s->bus->dma->aiocb = blk_aio_pwritev(blk, offset, &io->iov, 0, cb, io);
-}
-
-static void pmac_dma_trim(BlockBackend *blk,
-                        int64_t offset, int bytes,
-                        void (*cb)(void *opaque, int ret), void *opaque)
-{
-    DBDMA_io *io = opaque;
-    MACIOIDEState *m = io->opaque;
-    IDEState *s = idebus_active_if(&m->bus);
-    dma_addr_t dma_addr;
-
-    qemu_iovec_destroy(&io->iov);
-    qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1);
-
-    dma_addr = io->addr;
-    io->dir = DMA_DIRECTION_TO_DEVICE;
-    io->dma_len = io->len;
-    io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len,
-                                 io->dir);
-
-    qemu_iovec_add(&io->iov, io->dma_mem, io->len);
-    s->io_buffer_size -= io->len;
-    s->io_buffer_index += io->len;
-    io->len = 0;
-
-    s->bus->dma->aiocb = ide_issue_trim(offset, &io->iov, cb, io, blk);
-}
-
 static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
 {
     DBDMA_io *io = opaque;
@@ -244,6 +63,7 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
 
     if (ret < 0) {
         MACIO_DPRINTF("DMA error: %d\n", ret);
+        qemu_sglist_destroy(&s->sg);
         ide_atapi_io_error(s, ret);
         goto done;
     }
@@ -258,6 +78,7 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
 
     if (s->io_buffer_size <= 0) {
         MACIO_DPRINTF("End of IDE transfer\n");
+        qemu_sglist_destroy(&s->sg);
         ide_atapi_cmd_ok(s);
         m->dma_active = false;
         goto done;
@@ -282,7 +103,15 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
     /* Calculate current offset */
     offset = ((int64_t)s->lba << 11) + s->io_buffer_index;
 
-    pmac_dma_read(s->blk, offset, io->len, pmac_ide_atapi_transfer_cb, io);
+    qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1,
+                     &address_space_memory);
+    qemu_sglist_add(&s->sg, io->addr, io->len);
+    s->io_buffer_size -= io->len;
+    s->io_buffer_index += io->len;
+    io->len = 0;
+
+    s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1,
+                                      pmac_ide_atapi_transfer_cb, io);
     return;
 
 done:
@@ -310,6 +139,7 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
 
     if (ret < 0) {
         MACIO_DPRINTF("DMA error: %d\n", ret);
+        qemu_sglist_destroy(&s->sg);
         ide_dma_error(s);
         goto done;
     }
@@ -324,6 +154,7 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
 
     if (s->io_buffer_size <= 0) {
         MACIO_DPRINTF("End of IDE transfer\n");
+        qemu_sglist_destroy(&s->sg);
         s->status = READY_STAT | SEEK_STAT;
         ide_set_irq(s->bus);
         m->dma_active = false;
@@ -338,15 +169,27 @@ static void pmac_ide_transfer_cb(void *opaque, int ret)
     /* Calculate number of sectors */
     offset = (ide_get_sector(s) << 9) + s->io_buffer_index;
 
+    qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1,
+                     &address_space_memory);
+    qemu_sglist_add(&s->sg, io->addr, io->len);
+    s->io_buffer_size -= io->len;
+    s->io_buffer_index += io->len;
+    io->len = 0;
+
     switch (s->dma_cmd) {
     case IDE_DMA_READ:
-        pmac_dma_read(s->blk, offset, io->len, pmac_ide_transfer_cb, io);
+        s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1,
+                                          pmac_ide_atapi_transfer_cb, io);
         break;
     case IDE_DMA_WRITE:
-        pmac_dma_write(s->blk, offset, io->len, pmac_ide_transfer_cb, io);
+        s->bus->dma->aiocb = dma_blk_write(s->blk, &s->sg, offset, 0x1,
+                                           pmac_ide_transfer_cb, io);
         break;
     case IDE_DMA_TRIM:
-        pmac_dma_trim(s->blk, offset, io->len, pmac_ide_transfer_cb, io);
+        s->bus->dma->aiocb = dma_blk_io(blk_get_aio_context(s->blk), &s->sg,
+                                        offset, 0x1, ide_issue_trim, s->blk,
+                                        pmac_ide_transfer_cb, io,
+                                        DMA_DIRECTION_TO_DEVICE);
         break;
     default:
         abort();

hw/scsi/scsi-disk.c

@@ -341,6 +341,7 @@ static void scsi_do_read(SCSIDiskReq *r, int ret)
         r->req.resid -= r->req.sg->size;
         r->req.aiocb = dma_blk_io(blk_get_aio_context(s->qdev.conf.blk),
                                   r->req.sg, r->sector << BDRV_SECTOR_BITS,
+                                  BDRV_SECTOR_SIZE,
                                   sdc->dma_readv, r, scsi_dma_complete, r,
                                   DMA_DIRECTION_FROM_DEVICE);
     } else {
@@ -539,6 +540,7 @@ static void scsi_write_data(SCSIRequest *req)
         r->req.resid -= r->req.sg->size;
         r->req.aiocb = dma_blk_io(blk_get_aio_context(s->qdev.conf.blk),
                                   r->req.sg, r->sector << BDRV_SECTOR_BITS,
+                                  BDRV_SECTOR_SIZE,
                                   sdc->dma_writev, r, scsi_dma_complete, r,
                                   DMA_DIRECTION_TO_DEVICE);
     } else {

include/sysemu/dma.h

@@ -199,14 +199,14 @@ typedef BlockAIOCB *DMAIOFunc(int64_t offset, QEMUIOVector *iov,
                               void *opaque);
 
 BlockAIOCB *dma_blk_io(AioContext *ctx,
-                       QEMUSGList *sg, uint64_t offset,
+                       QEMUSGList *sg, uint64_t offset, uint32_t align,
                        DMAIOFunc *io_func, void *io_func_opaque,
                        BlockCompletionFunc *cb, void *opaque, DMADirection dir);
 BlockAIOCB *dma_blk_read(BlockBackend *blk,
-                         QEMUSGList *sg, uint64_t offset,
+                         QEMUSGList *sg, uint64_t offset, uint32_t align,
                          BlockCompletionFunc *cb, void *opaque);
 BlockAIOCB *dma_blk_write(BlockBackend *blk,
-                          QEMUSGList *sg, uint64_t offset,
+                          QEMUSGList *sg, uint64_t offset, uint32_t align,
                           BlockCompletionFunc *cb, void *opaque);
 uint64_t dma_buf_read(uint8_t *ptr, int32_t len, QEMUSGList *sg);
 uint64_t dma_buf_write(uint8_t *ptr, int32_t len, QEMUSGList *sg);

tests/qemu-iotests/172

@@ -0,0 +1,246 @@
+#!/bin/bash
+#
+# Test floppy configuration
+#
+# Copyright (C) 2016 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=kwolf@redhat.com
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+status=1	# failure is the default!
+
+_cleanup()
+{
+	_cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt qcow2
+_supported_proto file
+_supported_os Linux
+
+if [ "$QEMU_DEFAULT_MACHINE" != "pc" ]; then
+    _notrun "Requires a PC machine"
+fi
+
+function do_run_qemu()
+{
+    (
+        if ! test -t 0; then
+            while read cmd; do
+                echo $cmd
+            done
+        fi
+        echo quit
+    ) | $QEMU -nographic -monitor stdio -serial none "$@"
+    echo
+}
+
+function check_floppy_qtree()
+{
+    echo
+    echo Testing: "$@" | _filter_testdir
+
+    # QEMU_OPTIONS contains -nodefaults, we don't want that here because the
+    # defaults are part of what should be checked here.
+    #
+    # Apply the sed filter to stdout only, but keep the stderr output and
+    # filter the qemu program name in it.
+    echo "info qtree" |
+    (QEMU_OPTIONS="" do_run_qemu "$@" |
+        sed -ne '/^          dev: isa-fdc/,/^          dev:/{x;p}' ) 2>&1 |
+    _filter_win32 | _filter_qemu
+}
+
+function check_cache_mode()
+{
+    echo "info block none0" |
+    QEMU_OPTIONS="" do_run_qemu -drive if=none,file="$TEST_IMG" "$@" |
+    _filter_win32 | _filter_qemu | grep "Cache mode"
+}
+
+
+size=720k
+
+_make_test_img $size
+
+# Default drive semantics:
+#
+# By default you get a single empty floppy drive. You can override it with
+# -drive and using the same index, but if you use -drive to add a floppy to a
+# different index, you get both of them. However, as soon as you use any
+# '-device floppy', even to a different slot, the default drive is disabled.
+
+echo
+echo
+echo === Default ===
+
+check_floppy_qtree
+
+echo
+echo
+echo === Using -fda/-fdb options ===
+
+check_floppy_qtree -fda "$TEST_IMG"
+check_floppy_qtree -fdb "$TEST_IMG"
+check_floppy_qtree -fda "$TEST_IMG" -fdb "$TEST_IMG"
+
+
+echo
+echo
+echo === Using -drive options ===
+
+check_floppy_qtree -drive if=floppy,file="$TEST_IMG"
+check_floppy_qtree -drive if=floppy,file="$TEST_IMG",index=1
+check_floppy_qtree -drive if=floppy,file="$TEST_IMG" -drive if=floppy,file="$TEST_IMG",index=1
+
+echo
+echo
+echo === Using -drive if=none and -global ===
+
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -global isa-fdc.driveA=none0
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -global isa-fdc.driveB=none0
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" \
+                   -global isa-fdc.driveA=none0 -global isa-fdc.driveB=none1
+
+echo
+echo
+echo === Using -drive if=none and -device ===
+
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -device floppy,drive=none0
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,unit=1
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" \
+                   -device floppy,drive=none0 -device floppy,drive=none1,unit=1
+
+echo
+echo
+echo === Mixing -fdX and -global ===
+
+# Working
+check_floppy_qtree -fda "$TEST_IMG" -drive if=none,file="$TEST_IMG" -global isa-fdc.driveB=none0
+check_floppy_qtree -fdb "$TEST_IMG" -drive if=none,file="$TEST_IMG" -global isa-fdc.driveA=none0
+
+# Conflicting (-fdX wins)
+check_floppy_qtree -fda "$TEST_IMG" -drive if=none,file="$TEST_IMG" -global isa-fdc.driveA=none0
+check_floppy_qtree -fdb "$TEST_IMG" -drive if=none,file="$TEST_IMG" -global isa-fdc.driveB=none0
+
+echo
+echo
+echo === Mixing -fdX and -device ===
+
+# Working
+check_floppy_qtree -fda "$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0
+check_floppy_qtree -fda "$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,unit=1
+
+check_floppy_qtree -fdb "$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0
+check_floppy_qtree -fdb "$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,unit=0
+
+# Conflicting
+check_floppy_qtree -fda "$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,unit=0
+check_floppy_qtree -fdb "$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,unit=1
+
+echo
+echo
+echo === Mixing -drive and -device ===
+
+# Working
+check_floppy_qtree -drive if=floppy,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0
+check_floppy_qtree -drive if=floppy,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,unit=1
+
+# Conflicting
+check_floppy_qtree -drive if=floppy,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,unit=0
+
+echo
+echo
+echo === Mixing -global and -device ===
+
+# Working
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" \
+                   -global isa-fdc.driveA=none0 -device floppy,drive=none1
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" \
+                   -global isa-fdc.driveA=none0 -device floppy,drive=none1,unit=1
+
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" \
+                   -global isa-fdc.driveB=none0 -device floppy,drive=none1
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" \
+                   -global isa-fdc.driveB=none0 -device floppy,drive=none1,unit=0
+
+# Conflicting
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" \
+                   -global isa-fdc.driveA=none0 -device floppy,drive=none1,unit=0
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -drive if=none,file="$TEST_IMG" \
+                   -global isa-fdc.driveB=none0 -device floppy,drive=none1,unit=1
+
+echo
+echo
+echo === Too many floppy drives ===
+
+# Working
+check_floppy_qtree -drive if=floppy,file="$TEST_IMG" \
+                   -drive if=none,file="$TEST_IMG" \
+                   -drive if=none,file="$TEST_IMG" \
+                   -global isa-fdc.driveB=none0 \
+                   -device floppy,drive=none1
+
+echo
+echo
+echo === Creating an empty drive with anonymous BB ===
+
+check_floppy_qtree -device floppy
+check_floppy_qtree -device floppy,drive-type=120
+check_floppy_qtree -device floppy,drive-type=144
+check_floppy_qtree -device floppy,drive-type=288
+
+echo
+echo
+echo === Try passing different drive size with image ===
+
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,drive-type=120
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,drive-type=288
+
+echo
+echo
+echo === Try passing different block sizes ===
+
+# Explicitly setting the default is okay
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,logical_block_size=512
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,physical_block_size=512
+
+# Changing it is not
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,logical_block_size=4096
+check_floppy_qtree -drive if=none,file="$TEST_IMG" -device floppy,drive=none0,physical_block_size=1024
+
+echo
+echo
+echo === Writethrough caching ===
+
+check_cache_mode -device floppy,drive=none0
+check_cache_mode -device floppy,drive=none0,write-cache=on
+check_cache_mode -device floppy,drive=none0,write-cache=off
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0

tests/qemu-iotests/172.out

@@ -0,0 +1,1170 @@
+QA output created by 172
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=737280
+
+
+=== Default ===
+
+Testing:
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "288"
+
+
+=== Using -fda/-fdb options ===
+
+Testing: -fda TEST_DIR/t.qcow2
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -fdb TEST_DIR/t.qcow2
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "floppy1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "288"
+
+Testing: -fda TEST_DIR/t.qcow2 -fdb TEST_DIR/t.qcow2
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "floppy1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+
+=== Using -drive options ===
+
+Testing: -drive if=floppy,file=TEST_DIR/t.qcow2
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=floppy,file=TEST_DIR/t.qcow2,index=1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "floppy1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "288"
+
+Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=floppy,file=TEST_DIR/t.qcow2,index=1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "floppy1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+
+=== Using -drive if=none and -global ===
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveA=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveB=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveA=none0 -global isa-fdc.driveB=none1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+
+=== Using -drive if=none and -device ===
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0 -device floppy,drive=none1,unit=1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+
+=== Mixing -fdX and -global ===
+
+Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveB=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveA=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "floppy1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveA=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveB=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "floppy1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+
+=== Mixing -fdX and -device ===
+
+Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "floppy1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "floppy1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=0
+QEMU_PROG: -device floppy,drive=none0,unit=0: Floppy unit 0 is in use
+QEMU_PROG: -device floppy,drive=none0,unit=0: Device initialization failed.
+
+Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=1
+QEMU_PROG: -device floppy,drive=none0,unit=1: Floppy unit 1 is in use
+QEMU_PROG: -device floppy,drive=none0,unit=1: Device initialization failed.
+
+
+=== Mixing -drive and -device ===
+
+Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "floppy0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=0
+QEMU_PROG: -device floppy,drive=none0,unit=0: Floppy unit 0 is in use
+QEMU_PROG: -device floppy,drive=none0,unit=0: Device initialization failed.
+
+
+=== Mixing -global and -device ===
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveA=none0 -device floppy,drive=none1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveA=none0 -device floppy,drive=none1,unit=1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveB=none0 -device floppy,drive=none1
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveB=none0 -device floppy,drive=none1,unit=0
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none1"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+              dev: floppy, id ""
+                unit = 1 (0x1)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveA=none0 -device floppy,drive=none1,unit=0
+QEMU_PROG: -device floppy,drive=none1,unit=0: Floppy unit 0 is in use
+QEMU_PROG: -device floppy,drive=none1,unit=0: Device initialization failed.
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveB=none0 -device floppy,drive=none1,unit=1
+QEMU_PROG: -device floppy,drive=none1,unit=1: Floppy unit 1 is in use
+QEMU_PROG: -device floppy,drive=none1,unit=1: Device initialization failed.
+
+
+=== Too many floppy drives ===
+
+Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveB=none0 -device floppy,drive=none1
+QEMU_PROG: -device floppy,drive=none1: Can't create floppy unit 2, bus supports only 2 units
+QEMU_PROG: -device floppy,drive=none1: Device initialization failed.
+
+
+=== Creating an empty drive with anonymous BB ===
+
+Testing: -device floppy
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = ""
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "288"
+
+Testing: -device floppy,drive-type=120
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = ""
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "120"
+
+Testing: -device floppy,drive-type=144
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = ""
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -device floppy,drive-type=288
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = ""
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "288"
+
+
+=== Try passing different drive size with image ===
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,drive-type=120
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "120"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,drive-type=288
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "288"
+
+
+=== Try passing different block sizes ===
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,logical_block_size=512
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,physical_block_size=512
+
+          dev: isa-fdc, id ""
+            iobase = 1008 (0x3f0)
+            irq = 6 (0x6)
+            dma = 2 (0x2)
+            driveA = ""
+            driveB = ""
+            check_media_rate = true
+            fdtypeA = "auto"
+            fdtypeB = "auto"
+            fallback = "288"
+            isa irq 6
+            bus: floppy-bus.0
+              type floppy-bus
+              dev: floppy, id ""
+                unit = 0 (0x0)
+                drive = "none0"
+                logical_block_size = 512 (0x200)
+                physical_block_size = 512 (0x200)
+                min_io_size = 0 (0x0)
+                opt_io_size = 0 (0x0)
+                discard_granularity = 4294967295 (0xffffffff)
+                write-cache = "auto"
+                drive-type = "144"
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,logical_block_size=4096
+QEMU_PROG: -device floppy,drive=none0,logical_block_size=4096: Physical and logical block size must be 512 for floppy
+QEMU_PROG: -device floppy,drive=none0,logical_block_size=4096: Device initialization failed.
+
+Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,physical_block_size=1024
+QEMU_PROG: -device floppy,drive=none0,physical_block_size=1024: Physical and logical block size must be 512 for floppy
+QEMU_PROG: -device floppy,drive=none0,physical_block_size=1024: Device initialization failed.
+
+
+=== Writethrough caching ===
+    Cache mode:       writeback
+    Cache mode:       writeback
+    Cache mode:       writethrough
+*** done

tests/qemu-iotests/group

@@ -163,3 +163,4 @@
 160 rw auto quick
 162 auto quick
 170 rw auto quick
+172 auto

vl.c

@@ -218,6 +218,7 @@ static struct {
     { .driver = "isa-serial",           .flag = &default_serial    },
     { .driver = "isa-parallel",         .flag = &default_parallel  },
     { .driver = "isa-fdc",              .flag = &default_floppy    },
+    { .driver = "floppy",               .flag = &default_floppy    },
     { .driver = "ide-cd",               .flag = &default_cdrom     },
     { .driver = "ide-hd",               .flag = &default_cdrom     },
     { .driver = "ide-drive",            .flag = &default_cdrom     },