i.MX: KZM: use standalone i.MX31 SOC support

Convert the KZM board to use the i.MX31 SoC defintition instead of
redefining the entire SoC on the machine level. Major rewrite of the
machine init code.

While touching the memory map comment de-indent to the correct level
of indentation.

This obsoletes the legacy i.MX device device creation helpers which are removed.

Tested by booting a minimal Linux system on the emulated platform

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/kzm.c

@@ -13,131 +13,130 @@
  * i.MX31 SoC
  */
 
-#include "hw/sysbus.h"
+#include "hw/arm/fsl-imx31.h"
+#include "hw/boards.h"
+#include "qemu/error-report.h"
 #include "exec/address-spaces.h"
-#include "hw/hw.h"
-#include "hw/arm/arm.h"
-#include "hw/devices.h"
 #include "net/net.h"
-#include "sysemu/sysemu.h"
-#include "hw/boards.h"
+#include "hw/devices.h"
 #include "hw/char/serial.h"
-#include "hw/intc/imx_avic.h"
-#include "hw/arm/imx.h"
-
-    /* Memory map for Kzm Emulation Baseboard:
-     * 0x00000000-0x00003fff 16k secure ROM       IGNORED
-     * 0x00004000-0x00407fff Reserved             IGNORED
-     * 0x00404000-0x00407fff ROM                  IGNORED
-     * 0x00408000-0x0fffffff Reserved             IGNORED
-     * 0x10000000-0x1fffbfff RAM aliasing         IGNORED
-     * 0x1fffc000-0x1fffffff RAM                  EMULATED
-     * 0x20000000-0x2fffffff Reserved             IGNORED
-     * 0x30000000-0x7fffffff I.MX31 Internal Register Space
-     *   0x43f00000 IO_AREA0
-     *   0x43f90000 UART1                         EMULATED
-     *   0x43f94000 UART2                         EMULATED
-     *   0x68000000 AVIC                          EMULATED
-     *   0x53f80000 CCM                           EMULATED
-     *   0x53f94000 PIT 1                         EMULATED
-     *   0x53f98000 PIT 2                         EMULATED
-     *   0x53f90000 GPT                           EMULATED
-     * 0x80000000-0x87ffffff RAM                  EMULATED
-     * 0x88000000-0x8fffffff RAM Aliasing         EMULATED
-     * 0xa0000000-0xafffffff NAND Flash           IGNORED
-     * 0xb0000000-0xb3ffffff Unavailable          IGNORED
-     * 0xb4000000-0xb4000fff 8-bit free space     IGNORED
-     * 0xb4001000-0xb400100f Board control        IGNORED
-     *  0xb4001003           DIP switch
-     * 0xb4001010-0xb400101f 7-segment LED        IGNORED
-     * 0xb4001020-0xb400102f LED                  IGNORED
-     * 0xb4001030-0xb400103f LED                  IGNORED
-     * 0xb4001040-0xb400104f FPGA, UART           EMULATED
-     * 0xb4001050-0xb400105f FPGA, UART           EMULATED
-     * 0xb4001060-0xb40fffff FPGA                 IGNORED
-     * 0xb6000000-0xb61fffff LAN controller       EMULATED
-     * 0xb6200000-0xb62fffff FPGA NAND Controller IGNORED
-     * 0xb6300000-0xb7ffffff Free                 IGNORED
-     * 0xb8000000-0xb8004fff Memory control registers IGNORED
-     * 0xc0000000-0xc3ffffff PCMCIA/CF            IGNORED
-     * 0xc4000000-0xffffffff Reserved             IGNORED
-     */
-
-#define KZM_RAMADDRESS (0x80000000)
-#define KZM_FPGA       (0xb4001040)
+#include "sysemu/qtest.h"
+
+/* Memory map for Kzm Emulation Baseboard:
+ * 0x00000000-0x7fffffff See i.MX31 SOC for support
+ * 0x80000000-0x8fffffff RAM                  EMULATED
+ * 0x90000000-0x9fffffff RAM                  EMULATED
+ * 0xa0000000-0xafffffff Flash                IGNORED
+ * 0xb0000000-0xb3ffffff Unavailable          IGNORED
+ * 0xb4000000-0xb4000fff 8-bit free space     IGNORED
+ * 0xb4001000-0xb400100f Board control        IGNORED
+ *  0xb4001003           DIP switch
+ * 0xb4001010-0xb400101f 7-segment LED        IGNORED
+ * 0xb4001020-0xb400102f LED                  IGNORED
+ * 0xb4001030-0xb400103f LED                  IGNORED
+ * 0xb4001040-0xb400104f FPGA, UART           EMULATED
+ * 0xb4001050-0xb400105f FPGA, UART           EMULATED
+ * 0xb4001060-0xb40fffff FPGA                 IGNORED
+ * 0xb6000000-0xb61fffff LAN controller       EMULATED
+ * 0xb6200000-0xb62fffff FPGA NAND Controller IGNORED
+ * 0xb6300000-0xb7ffffff Free                 IGNORED
+ * 0xb8000000-0xb8004fff Memory control registers IGNORED
+ * 0xc0000000-0xc3ffffff PCMCIA/CF            IGNORED
+ * 0xc4000000-0xffffffff Reserved             IGNORED
+ */
+
+typedef struct IMX31KZM {
+    FslIMX31State soc;
+    MemoryRegion ram;
+    MemoryRegion ram_alias;
+} IMX31KZM;
+
+#define KZM_RAM_ADDR            (FSL_IMX31_SDRAM0_ADDR)
+#define KZM_FPGA_ADDR           (FSL_IMX31_CS4_ADDR + 0x1040)
+#define KZM_LAN9118_ADDR        (FSL_IMX31_CS5_ADDR)
 
 static struct arm_boot_info kzm_binfo = {
-    .loader_start = KZM_RAMADDRESS,
+    .loader_start = KZM_RAM_ADDR,
     .board_id = 1722,
 };
 
 static void kzm_init(MachineState *machine)
 {
-    ram_addr_t ram_size = machine->ram_size;
-    const char *cpu_model = machine->cpu_model;
-    const char *kernel_filename = machine->kernel_filename;
-    const char *kernel_cmdline = machine->kernel_cmdline;
-    const char *initrd_filename = machine->initrd_filename;
-    ARMCPU *cpu;
-    MemoryRegion *address_space_mem = get_system_memory();
-    MemoryRegion *ram = g_new(MemoryRegion, 1);
-    MemoryRegion *sram = g_new(MemoryRegion, 1);
-    MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
-    DeviceState *dev;
-    DeviceState *ccm;
-
-    if (!cpu_model) {
-        cpu_model = "arm1136";
-    }
-
-    cpu = cpu_arm_init(cpu_model);
-    if (!cpu) {
-        fprintf(stderr, "Unable to find CPU definition\n");
+    IMX31KZM *s = g_new0(IMX31KZM, 1);
+    Error *err = NULL;
+    unsigned int ram_size;
+    unsigned int alias_offset;
+    unsigned int i;
+
+    object_initialize(&s->soc, sizeof(s->soc), TYPE_FSL_IMX31);
+    object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
+                              &error_abort);
+
+    object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
+    if (err != NULL) {
+        error_report("%s", error_get_pretty(err));
         exit(1);
     }
 
-    /* On a real system, the first 16k is a `secure boot rom' */
-
-    memory_region_allocate_system_memory(ram, NULL, "kzm.ram", ram_size);
-    memory_region_add_subregion(address_space_mem, KZM_RAMADDRESS, ram);
-
-    memory_region_init_alias(ram_alias, NULL, "ram.alias", ram, 0, ram_size);
-    memory_region_add_subregion(address_space_mem, 0x88000000, ram_alias);
-
-    memory_region_init_ram(sram, NULL, "kzm.sram", 0x4000, &error_abort);
-    memory_region_add_subregion(address_space_mem, 0x1FFFC000, sram);
-
-    dev = sysbus_create_varargs(TYPE_IMX_AVIC, 0x68000000,
-                                qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ),
-                                qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ),
-                                NULL);
-
-    imx_serial_create(0, 0x43f90000, qdev_get_gpio_in(dev, 45));
-    imx_serial_create(1, 0x43f94000, qdev_get_gpio_in(dev, 32));
-
-    ccm = sysbus_create_simple(TYPE_IMX_CCM, 0x53f80000, NULL);
+    /* Check the amount of memory is compatible with the SOC */
+    if (machine->ram_size > (FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE)) {
+        error_report("WARNING: RAM size " RAM_ADDR_FMT " above max supported, "
+                     "reduced to %x", machine->ram_size,
+                     FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE);
+        machine->ram_size = FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE;
+    }
 
-    imx_timerp_create(0x53f94000, qdev_get_gpio_in(dev, 28), ccm);
-    imx_timerp_create(0x53f98000, qdev_get_gpio_in(dev, 27), ccm);
-    imx_timerg_create(0x53f90000, qdev_get_gpio_in(dev, 29), ccm);
+    memory_region_allocate_system_memory(&s->ram, NULL, "kzm.ram",
+                                         machine->ram_size);
+    memory_region_add_subregion(get_system_memory(), FSL_IMX31_SDRAM0_ADDR,
+                                &s->ram);
+
+    /* initialize the alias memory if any */
+    for (i = 0, ram_size = machine->ram_size, alias_offset = 0;
+         (i < 2) && ram_size; i++) {
+        unsigned int size;
+        static const struct {
+            hwaddr addr;
+            unsigned int size;
+        } ram[2] = {
+            { FSL_IMX31_SDRAM0_ADDR, FSL_IMX31_SDRAM0_SIZE },
+            { FSL_IMX31_SDRAM1_ADDR, FSL_IMX31_SDRAM1_SIZE },
+        };
+
+        size = MIN(ram_size, ram[i].size);
+
+        ram_size -= size;
+
+        if (size < ram[i].size) {
+            memory_region_init_alias(&s->ram_alias, NULL, "ram.alias",
+                                     &s->ram, alias_offset, ram[i].size - size);
+            memory_region_add_subregion(get_system_memory(),
+                                        ram[i].addr + size, &s->ram_alias);
+        }
+
+        alias_offset += ram[i].size;
+    }
 
     if (nd_table[0].used) {
-        lan9118_init(&nd_table[0], 0xb6000000, qdev_get_gpio_in(dev, 52));
+        lan9118_init(&nd_table[0], KZM_LAN9118_ADDR,
+                     qdev_get_gpio_in(DEVICE(&s->soc.avic), 52));
     }
 
     if (serial_hds[2]) { /* touchscreen */
-        serial_mm_init(address_space_mem, KZM_FPGA+0x10, 0,
-                       qdev_get_gpio_in(dev, 52),
-                       14745600, serial_hds[2],
-                       DEVICE_NATIVE_ENDIAN);
+        serial_mm_init(get_system_memory(), KZM_FPGA_ADDR+0x10, 0,
+                       qdev_get_gpio_in(DEVICE(&s->soc.avic), 52),
+                       14745600, serial_hds[2], DEVICE_NATIVE_ENDIAN);
     }
 
-    kzm_binfo.ram_size = ram_size;
-    kzm_binfo.kernel_filename = kernel_filename;
-    kzm_binfo.kernel_cmdline = kernel_cmdline;
-    kzm_binfo.initrd_filename = initrd_filename;
+    kzm_binfo.ram_size = machine->ram_size;
+    kzm_binfo.kernel_filename = machine->kernel_filename;
+    kzm_binfo.kernel_cmdline = machine->kernel_cmdline;
+    kzm_binfo.initrd_filename = machine->initrd_filename;
     kzm_binfo.nb_cpus = 1;
-    arm_load_kernel(cpu, &kzm_binfo);
+
+    if (!qtest_enabled()) {
+        arm_load_kernel(&s->soc.cpu, &kzm_binfo);
+    }
 }
 
 static QEMUMachine kzm_machine = {

hw/char/imx_serial.c

@@ -21,7 +21,6 @@
 #include "hw/char/imx_serial.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/char.h"
-#include "hw/arm/imx.h"
 
 //#define DEBUG_SERIAL 1
 #ifdef DEBUG_SERIAL
@@ -334,40 +333,6 @@ static void imx_serial_init(Object *obj)
     sysbus_init_irq(sbd, &s->irq);
 }
 
-void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq)
-{
-    DeviceState *dev;
-    SysBusDevice *bus;
-    CharDriverState *chr;
-    const char chr_name[] = "serial";
-    char label[ARRAY_SIZE(chr_name) + 1];
-
-    dev = qdev_create(NULL, TYPE_IMX_SERIAL);
-
-    if (uart >= MAX_SERIAL_PORTS) {
-        hw_error("Cannot assign uart %d: QEMU supports only %d ports\n",
-                 uart, MAX_SERIAL_PORTS);
-    }
-    chr = serial_hds[uart];
-    if (!chr) {
-        snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, uart);
-        chr = qemu_chr_new(label, "null", NULL);
-        if (!(chr)) {
-            hw_error("Can't assign serial port to imx-uart%d.\n", uart);
-        }
-    }
-
-    qdev_prop_set_chr(dev, "chardev", chr);
-    bus = SYS_BUS_DEVICE(dev);
-    qdev_init_nofail(dev);
-    if (addr != (hwaddr)-1) {
-        sysbus_mmio_map(bus, 0, addr);
-    }
-    sysbus_connect_irq(bus, 0, irq);
-
-}
-
-
 static Property imx_serial_properties[] = {
     DEFINE_PROP_CHR("chardev", IMXSerialState, chr),
     DEFINE_PROP_END_OF_LIST(),

hw/timer/imx_epit.c

@@ -12,7 +12,6 @@
  *
  */
 
-#include "hw/arm/imx.h"
 #include "hw/timer/imx_epit.h"
 #include "hw/misc/imx_ccm.h"
 #include "qemu/main-loop.h"
@@ -287,16 +286,6 @@ static void imx_epit_cmp(void *opaque)
     imx_epit_update_int(s);
 }
 
-void imx_timerp_create(const hwaddr addr, qemu_irq irq, DeviceState *ccm)
-{
-    IMXEPITState *pp;
-    DeviceState *dev;
-
-    dev = sysbus_create_simple(TYPE_IMX_EPIT, addr, irq);
-    pp = IMX_EPIT(dev);
-    pp->ccm = ccm;
-}
-
 static const MemoryRegionOps imx_epit_ops = {
     .read = imx_epit_read,
     .write = imx_epit_write,

hw/timer/imx_gpt.c

@@ -12,7 +12,6 @@
  *
  */
 
-#include "hw/arm/imx.h"
 #include "hw/timer/imx_gpt.h"
 #include "hw/misc/imx_ccm.h"
 #include "qemu/main-loop.h"
@@ -449,16 +448,6 @@ static void imx_gpt_realize(DeviceState *dev, Error **errp)
     s->timer = ptimer_init(bh);
 }
 
-void imx_timerg_create(const hwaddr addr, qemu_irq irq, DeviceState *ccm)
-{
-    IMXGPTState *pp;
-    DeviceState *dev;
-
-    dev = sysbus_create_simple(TYPE_IMX_GPT, addr, irq);
-    pp = IMX_GPT(dev);
-    pp->ccm = ccm;
-}
-
 static void imx_gpt_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);

include/hw/arm/imx.h

@@ -1,26 +0,0 @@
-/*
- * i.MX31 emulation
- *
- * Copyright (C) 2012 Peter Chubb
- * NICTA
- *
- * This code is released under the GPL, version 2.0 or later
- * See the file `../COPYING' for details.
- */
-
-#ifndef IMX_H
-#define IMX_H
-
-#include "hw/misc/imx_ccm.h"
-
-void imx_serial_create(int uart, const hwaddr addr, qemu_irq irq);
-
-void imx_timerp_create(const hwaddr addr,
-                      qemu_irq irq,
-                      DeviceState *ccm);
-void imx_timerg_create(const hwaddr addr,
-                      qemu_irq irq,
-                      DeviceState *ccm);
-
-
-#endif /* IMX_H */