tests: Set read-zeroes on for null-co driver

This patch is to reduce the number of Valgrind report messages about
using uninitialized memory with the null-co driver. It helps to filter
real memory issues and is the same work done for the iotests with the
commit ID a6862418fec4072.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1564404360-733987-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

tests/drive_del-test.c

@@ -121,7 +121,8 @@ static void test_drive_del_device_del(void)
     QTestState *qts;
 
     /* Start with a drive used by a device that unplugs instantaneously */
-    qts = qtest_initf("-drive if=none,id=drive0,file=null-co://,format=raw"
+    qts = qtest_initf("-drive if=none,id=drive0,file=null-co://,"
+                      "file.read-zeroes=on,format=raw"
                       " -device virtio-scsi-%s"
                       " -device scsi-hd,drive=drive0,id=dev0",
                       qvirtio_get_dev_type());

tests/libqos/virtio-scsi.c

@@ -95,7 +95,8 @@ static void virtio_scsi_register_nodes(void)
     };
 
     QOSGraphEdgeOptions opts = {
-        .before_cmd_line = "-drive id=drv0,if=none,file=null-co://,format=raw",
+        .before_cmd_line = "-drive id=drv0,if=none,file=null-co://,"
+                           "file.read-zeroes=on,format=raw",
         .after_cmd_line = "-device scsi-hd,bus=vs0.0,drive=drv0",
     };
 

tests/megasas-test.c

@@ -75,7 +75,8 @@ static void megasas_register_nodes(void)
 {
     QOSGraphEdgeOptions opts = {
         .extra_device_opts = "addr=04.0,id=scsi0",
-        .before_cmd_line = "-drive id=drv0,if=none,file=null-co://,format=raw",
+        .before_cmd_line = "-drive id=drv0,if=none,file=null-co://,"
+                           "file.read-zeroes=on,format=raw",
         .after_cmd_line = "-device scsi-hd,bus=scsi0.0,drive=drv0",
     };
 

tests/nvme-test.c

@@ -70,7 +70,8 @@ static void nvme_register_nodes(void)
 {
     QOSGraphEdgeOptions opts = {
         .extra_device_opts = "addr=04.0,drive=drv0,serial=foo",
-        .before_cmd_line = "-drive id=drv0,if=none,file=null-co://,format=raw",
+        .before_cmd_line = "-drive id=drv0,if=none,file=null-co://,"
+                           "file.read-zeroes=on,format=raw",
     };
 
     add_qpci_address(&opts, &(QPCIAddress) { .devfn = QPCI_DEVFN(4, 0) });

tests/qmp-test.c

@@ -187,7 +187,7 @@ static void send_cmd_that_blocks(QTestState *s, const char *id)
                    " 'arguments': {"
                    " 'driver': 'blkdebug', 'node-name': %s,"
                    " 'config': %s,"
-                   " 'image': { 'driver': 'null-co' } } }",
+                   " 'image': { 'driver': 'null-co', 'read-zeroes': true } } }",
                    id, id, fifo_name);
 }
 

tests/test-blockjob-txn.c

@@ -15,6 +15,7 @@
 #include "qemu/main-loop.h"
 #include "block/blockjob_int.h"
 #include "sysemu/block-backend.h"
+#include "qapi/qmp/qdict.h"
 
 typedef struct {
     BlockJob common;
@@ -96,7 +97,9 @@ static BlockJob *test_block_job_start(unsigned int iterations,
 
     data = g_new0(TestBlockJobCBData, 1);
 
-    bs = bdrv_open("null-co://", NULL, NULL, 0, &error_abort);
+    QDict *opt = qdict_new();
+    qdict_put_str(opt, "file.read-zeroes", "on");
+    bs = bdrv_open("null-co://", NULL, opt, 0, &error_abort);
     g_assert_nonnull(bs);
 
     snprintf(job_id, sizeof(job_id), "job%u", counter++);

tests/test-blockjob.c

@@ -15,6 +15,7 @@
 #include "qemu/main-loop.h"
 #include "block/blockjob_int.h"
 #include "sysemu/block-backend.h"
+#include "qapi/qmp/qdict.h"
 
 static const BlockJobDriver test_block_job_driver = {
     .job_driver = {
@@ -71,7 +72,9 @@ static BlockBackend *create_blk(const char *name)
     BlockBackend *blk = blk_new(qemu_get_aio_context(), 0, BLK_PERM_ALL);
     BlockDriverState *bs;
 
-    bs = bdrv_open("null-co://", NULL, NULL, 0, &error_abort);
+    QDict *opt = qdict_new();
+    qdict_put_str(opt, "file.read-zeroes", "on");
+    bs = bdrv_open("null-co://", NULL, opt, 0, &error_abort);
     g_assert_nonnull(bs);
 
     blk_insert_bs(blk, bs, &error_abort);

tests/usb-hcd-uhci-test.c

@@ -57,7 +57,8 @@ int main(int argc, char **argv)
 {
     const char *arch = qtest_get_arch();
     const char *cmd = "-device piix3-usb-uhci,id=uhci,addr=1d.0"
-                      " -drive id=drive0,if=none,file=null-co://,format=raw"
+                      " -drive id=drive0,if=none,file=null-co://,"
+                      "file.read-zeroes=on,format=raw"
                       " -device usb-tablet,bus=uhci.0,port=1";
     int ret;
 

tests/usb-hcd-xhci-test.c

@@ -56,7 +56,8 @@ int main(int argc, char **argv)
     qtest_add_func("/xhci/pci/hotplug/usb-ccid", test_usb_ccid_hotplug);
 
     qtest_start("-device nec-usb-xhci,id=xhci"
-                " -drive id=drive0,if=none,file=null-co://,format=raw");
+                " -drive id=drive0,if=none,file=null-co://,"
+                "file.read-zeroes=on,format=raw");
     ret = g_test_run();
     qtest_end();
 

tests/virtio-blk-test.c

@@ -753,8 +753,10 @@ static void *virtio_blk_test_setup(GString *cmd_line, void *arg)
     char *tmp_path = drive_create();
 
     g_string_append_printf(cmd_line,
-                           " -drive if=none,id=drive0,file=%s,format=raw,auto-read-only=off "
-                           "-drive if=none,id=drive1,file=null-co://,format=raw ",
+                           " -drive if=none,id=drive0,file=%s,"
+                           "format=raw,auto-read-only=off "
+                           "-drive if=none,id=drive1,file=null-co://,"
+                           "file.read-zeroes=on,format=raw ",
                            tmp_path);
 
     return arg;

tests/virtio-ccw-test.c

@@ -53,7 +53,8 @@ static void virtio_serial_hotplug(void)
 
 static void virtio_blk_nop(void)
 {
-    global_qtest = qtest_initf("-drive if=none,id=drv0,file=null-co://,format=raw "
+    global_qtest = qtest_initf("-drive if=none,id=drv0,file=null-co://,"
+                               "file.read-zeroes=on,format=raw "
                                 "-device virtio-blk-ccw,drive=drv0");
     qtest_end();
 }
@@ -78,8 +79,10 @@ static void virtio_scsi_nop(void)
 
 static void virtio_scsi_hotplug(void)
 {
-    global_qtest = qtest_initf("-drive if=none,id=drv0,file=null-co://,format=raw "
-                                "-drive if=none,id=drv1,file=null-co://,format=raw "
+    global_qtest = qtest_initf("-drive if=none,id=drv0,file=null-co://,"
+                               "file.read-zeroes=on,format=raw "
+                                "-drive if=none,id=drv1,file=null-co://,"
+                                "file.read-zeroes=on,format=raw "
                                 "-device virtio-scsi-ccw "
                                 "-device scsi-hd,drive=drv0");
     qtest_qmp_device_add("scsi-hd", "scsihd", "{'drive': 'drv1'}");

tests/virtio-scsi-test.c

@@ -239,7 +239,8 @@ fail:
 static void *virtio_scsi_hotplug_setup(GString *cmd_line, void *arg)
 {
     g_string_append(cmd_line,
-                    " -drive id=drv1,if=none,file=null-co://,format=raw");
+                    " -drive id=drv1,if=none,file=null-co://,"
+                    "file.read-zeroes=on,format=raw");
     return arg;
 }
 
@@ -247,6 +248,7 @@ static void *virtio_scsi_setup(GString *cmd_line, void *arg)
 {
     g_string_append(cmd_line,
                     " -drive file=blkdebug::null-co://,"
+                    "file.image.read-zeroes=on,"
                     "if=none,id=dr1,format=raw,file.align=4k "
                     "-device scsi-hd,drive=dr1,lun=0,scsi-id=1");
     return arg;
@@ -256,7 +258,7 @@ static void *virtio_scsi_setup_iothread(GString *cmd_line, void *arg)
 {
     g_string_append(cmd_line,
                     " -object iothread,id=thread0"
-                    " -blockdev driver=null-co,node-name=null0"
+                    " -blockdev driver=null-co,read-zeroes=on,node-name=null0"
                     " -device scsi-hd,drive=null0");
     return arg;
 }