include/exec: Split out exec/cpu-interrupt.h

Some of these bits are actually common to all cpus; while the
reset have common reservations for target-specific usage.
While generic code cannot know what the target-specific usage is,
common code can know what to do with the bits, e.g. single-step.

Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

include/exec/cpu-all.h

@@ -21,6 +21,7 @@
 
 #include "exec/page-protection.h"
 #include "exec/cpu-common.h"
+#include "exec/cpu-interrupt.h"
 #include "exec/memory.h"
 #include "exec/tswap.h"
 #include "hw/core/cpu.h"
@@ -109,58 +110,6 @@ static inline void stl_phys_notdirty(AddressSpace *as, hwaddr addr, uint32_t val
 
 CPUArchState *cpu_copy(CPUArchState *env);
 
-/* Flags for use in ENV->INTERRUPT_PENDING.
-
-   The numbers assigned here are non-sequential in order to preserve
-   binary compatibility with the vmstate dump.  Bit 0 (0x0001) was
-   previously used for CPU_INTERRUPT_EXIT, and is cleared when loading
-   the vmstate dump.  */
-
-/* External hardware interrupt pending.  This is typically used for
-   interrupts from devices.  */
-#define CPU_INTERRUPT_HARD        0x0002
-
-/* Exit the current TB.  This is typically used when some system-level device
-   makes some change to the memory mapping.  E.g. the a20 line change.  */
-#define CPU_INTERRUPT_EXITTB      0x0004
-
-/* Halt the CPU.  */
-#define CPU_INTERRUPT_HALT        0x0020
-
-/* Debug event pending.  */
-#define CPU_INTERRUPT_DEBUG       0x0080
-
-/* Reset signal.  */
-#define CPU_INTERRUPT_RESET       0x0400
-
-/* Several target-specific external hardware interrupts.  Each target/cpu.h
-   should define proper names based on these defines.  */
-#define CPU_INTERRUPT_TGT_EXT_0   0x0008
-#define CPU_INTERRUPT_TGT_EXT_1   0x0010
-#define CPU_INTERRUPT_TGT_EXT_2   0x0040
-#define CPU_INTERRUPT_TGT_EXT_3   0x0200
-#define CPU_INTERRUPT_TGT_EXT_4   0x1000
-
-/* Several target-specific internal interrupts.  These differ from the
-   preceding target-specific interrupts in that they are intended to
-   originate from within the cpu itself, typically in response to some
-   instruction being executed.  These, therefore, are not masked while
-   single-stepping within the debugger.  */
-#define CPU_INTERRUPT_TGT_INT_0   0x0100
-#define CPU_INTERRUPT_TGT_INT_1   0x0800
-#define CPU_INTERRUPT_TGT_INT_2   0x2000
-
-/* First unused bit: 0x4000.  */
-
-/* The set of all bits that should be masked when single-stepping.  */
-#define CPU_INTERRUPT_SSTEP_MASK \
-    (CPU_INTERRUPT_HARD          \
-     | CPU_INTERRUPT_TGT_EXT_0   \
-     | CPU_INTERRUPT_TGT_EXT_1   \
-     | CPU_INTERRUPT_TGT_EXT_2   \
-     | CPU_INTERRUPT_TGT_EXT_3   \
-     | CPU_INTERRUPT_TGT_EXT_4)
-
 #include "cpu.h"
 
 #ifdef CONFIG_USER_ONLY

include/exec/cpu-interrupt.h

@@ -0,0 +1,70 @@
+/*
+ * Flags for use with cpu_interrupt()
+ *
+ * Copyright (c) 2003 Fabrice Bellard
+ * SPDX-License-Identifier: LGPL-2.1-or-later
+ */
+
+#ifndef CPU_INTERRUPT_H
+#define CPU_INTERRUPT_H
+
+/*
+ * The numbers assigned here are non-sequential in order to preserve binary
+ * compatibility with the vmstate dump.  Bit 0 (0x0001) was previously used
+ * for CPU_INTERRUPT_EXIT, and is cleared when loading the vmstate dump.
+ */
+
+/*
+ * External hardware interrupt pending.
+ * This is typically used for interrupts from devices.
+ */
+#define CPU_INTERRUPT_HARD        0x0002
+
+/*
+ * Exit the current TB.  This is typically used when some system-level device
+ * makes some change to the memory mapping.  E.g. the a20 line change.
+ */
+#define CPU_INTERRUPT_EXITTB      0x0004
+
+/* Halt the CPU.  */
+#define CPU_INTERRUPT_HALT        0x0020
+
+/* Debug event pending.  */
+#define CPU_INTERRUPT_DEBUG       0x0080
+
+/* Reset signal.  */
+#define CPU_INTERRUPT_RESET       0x0400
+
+/*
+ * Several target-specific external hardware interrupts.  Each target/cpu.h
+ * should define proper names based on these defines.
+ */
+#define CPU_INTERRUPT_TGT_EXT_0   0x0008
+#define CPU_INTERRUPT_TGT_EXT_1   0x0010
+#define CPU_INTERRUPT_TGT_EXT_2   0x0040
+#define CPU_INTERRUPT_TGT_EXT_3   0x0200
+#define CPU_INTERRUPT_TGT_EXT_4   0x1000
+
+/*
+ * Several target-specific internal interrupts.  These differ from the
+ * preceding target-specific interrupts in that they are intended to
+ * originate from within the cpu itself, typically in response to some
+ * instruction being executed.  These, therefore, are not masked while
+ * single-stepping within the debugger.
+ */
+#define CPU_INTERRUPT_TGT_INT_0   0x0100
+#define CPU_INTERRUPT_TGT_INT_1   0x0800
+#define CPU_INTERRUPT_TGT_INT_2   0x2000
+
+/* First unused bit: 0x4000.  */
+
+/* The set of all bits that should be masked when single-stepping.  */
+#define CPU_INTERRUPT_SSTEP_MASK \
+    (CPU_INTERRUPT_HARD          \
+     | CPU_INTERRUPT_TGT_EXT_0   \
+     | CPU_INTERRUPT_TGT_EXT_1   \
+     | CPU_INTERRUPT_TGT_EXT_2   \
+     | CPU_INTERRUPT_TGT_EXT_3   \
+     | CPU_INTERRUPT_TGT_EXT_4)
+
+#endif /* CPU_INTERRUPT_H */

include/exec/poison.h

@@ -46,19 +46,6 @@
 
 #pragma GCC poison TARGET_PHYS_ADDR_SPACE_BITS
 
-#pragma GCC poison CPU_INTERRUPT_HARD
-#pragma GCC poison CPU_INTERRUPT_EXITTB
-#pragma GCC poison CPU_INTERRUPT_HALT
-#pragma GCC poison CPU_INTERRUPT_DEBUG
-#pragma GCC poison CPU_INTERRUPT_TGT_EXT_0
-#pragma GCC poison CPU_INTERRUPT_TGT_EXT_1
-#pragma GCC poison CPU_INTERRUPT_TGT_EXT_2
-#pragma GCC poison CPU_INTERRUPT_TGT_EXT_3
-#pragma GCC poison CPU_INTERRUPT_TGT_EXT_4
-#pragma GCC poison CPU_INTERRUPT_TGT_INT_0
-#pragma GCC poison CPU_INTERRUPT_TGT_INT_1
-#pragma GCC poison CPU_INTERRUPT_TGT_INT_2
-
 #pragma GCC poison CONFIG_ALPHA_DIS
 #pragma GCC poison CONFIG_HPPA_DIS
 #pragma GCC poison CONFIG_I386_DIS