slirp: add configure option to disable smbd

Replace Windows specific macro with a more generic feature detection
macro. Allows slirp smb feature to be disabled manually as well.

Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-5-j@getutm.app>
[Use $default_feature as the default. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

configure

@@ -464,6 +464,7 @@ gettext="auto"
 fuse="auto"
 fuse_lseek="auto"
 multiprocess="auto"
+slirp_smbd="$default_feature"
 
 malloc_trim="auto"
 gio="$default_feature"
@@ -836,8 +837,6 @@ do
     fi
 done
 
-: ${smbd=${SMBD-/usr/sbin/smbd}}
-
 # Default objcc to clang if available, otherwise use CC
 if has clang; then
   objcc=clang
@@ -1570,6 +1569,10 @@ for opt do
   ;;
   --disable-gio) gio=no
   ;;
+  --enable-slirp-smbd) slirp_smbd=yes
+  ;;
+  --disable-slirp-smbd) slirp_smbd=no
+  ;;
   *)
       echo "ERROR: unknown option $opt"
       echo "Try '$0 --help' for more information"
@@ -1925,6 +1928,7 @@ disabled with --disable-FEATURE, default is enabled if available
   fuse-lseek      SEEK_HOLE/SEEK_DATA support for FUSE exports
   multiprocess    Out of process device emulation support
   gio             libgio support
+  slirp-smbd      use smbd (at path --smbd=*) in slirp networking
 
 NOTE: The object files are built at the place where configure is launched
 EOF
@@ -5261,6 +5265,19 @@ case "$slirp" in
     ;;
 esac
 
+# Check for slirp smbd dupport
+: ${smbd=${SMBD-/usr/sbin/smbd}}
+if test "$slirp_smbd" != "no" ; then
+  if test "$mingw32" = "yes" ; then
+    if test "$slirp_smbd" = "yes" ; then
+      error_exit "Host smbd not supported on this platform."
+    fi
+    slirp_smbd=no
+  else
+    slirp_smbd=yes
+  fi
+fi
+
 ##########################################
 # check for usable __NR_keyctl syscall
 
@@ -5536,7 +5553,10 @@ fi
 if test "$guest_agent" = "yes" ; then
   echo "CONFIG_GUEST_AGENT=y" >> $config_host_mak
 fi
-echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
+if test "$slirp_smbd" = "yes" ; then
+  echo "CONFIG_SLIRP_SMBD=y" >> $config_host_mak
+  echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
+fi
 if test "$vde" = "yes" ; then
   echo "CONFIG_VDE=y" >> $config_host_mak
   echo "VDE_LIBS=$vde_libs" >> $config_host_mak

meson.build

@@ -2469,7 +2469,7 @@ summary_info += {'genisoimage':       config_host['GENISOIMAGE']}
 if targetos == 'windows' and config_host.has_key('CONFIG_GUEST_AGENT')
   summary_info += {'wixl':            wixl.found() ? wixl.full_path() : false}
 endif
-if slirp_opt != 'disabled'
+if slirp_opt != 'disabled' and 'CONFIG_SLIRP_SMBD' in config_host
   summary_info += {'smbd':            config_host['CONFIG_SMBD_COMMAND']}
 endif
 summary(summary_info, bool_yn: true, section: 'Host binaries')

net/slirp.c

@@ -27,7 +27,7 @@
 #include "net/slirp.h"
 
 
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
 #include <pwd.h>
 #include <sys/wait.h>
 #endif
@@ -91,7 +91,7 @@ typedef struct SlirpState {
     Slirp *slirp;
     Notifier poll_notifier;
     Notifier exit_notifier;
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
     gchar *smb_dir;
 #endif
     GSList *fwd;
@@ -104,7 +104,7 @@ static QTAILQ_HEAD(, SlirpState) slirp_stacks =
 static int slirp_hostfwd(SlirpState *s, const char *redir_str, Error **errp);
 static int slirp_guestfwd(SlirpState *s, const char *config_str, Error **errp);
 
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
 static int slirp_smb(SlirpState *s, const char *exported_dir,
                      struct in_addr vserver_addr, Error **errp);
 static void slirp_smb_cleanup(SlirpState *s);
@@ -377,7 +377,7 @@ static int net_slirp_init(NetClientState *peer, const char *model,
     struct in6_addr ip6_prefix;
     struct in6_addr ip6_host;
     struct in6_addr ip6_dns;
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
     struct in_addr smbsrv = { .s_addr = 0 };
 #endif
     NetClientState *nc;
@@ -487,7 +487,7 @@ static int net_slirp_init(NetClientState *peer, const char *model,
         return -1;
     }
 
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
     if (vsmbserver && !inet_aton(vsmbserver, &smbsrv)) {
         error_setg(errp, "Failed to parse SMB address");
         return -1;
@@ -602,7 +602,7 @@ static int net_slirp_init(NetClientState *peer, const char *model,
             }
         }
     }
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
     if (smb_export) {
         if (slirp_smb(s, smb_export, smbsrv, errp) < 0) {
             goto error;
@@ -794,7 +794,7 @@ void hmp_hostfwd_add(Monitor *mon, const QDict *qdict)
 
 }
 
-#ifndef _WIN32
+#if defined(CONFIG_SLIRP_SMBD)
 
 /* automatic user mode samba server configuration */
 static void slirp_smb_cleanup(SlirpState *s)
@@ -909,7 +909,7 @@ static int slirp_smb(SlirpState* s, const char *exported_dir,
     return 0;
 }
 
-#endif /* !defined(_WIN32) */
+#endif /* defined(CONFIG_SLIRP_SMBD) */
 
 static int guestfwd_can_read(void *opaque)
 {