hw/intc/arm_gicv3: Implement new GICv4 redistributor registers

Implement the new GICv4 redistributor registers: GICR_VPROPBASER
and GICR_VPENDBASER; for the moment we implement these as simple
reads-as-written stubs, together with the necessary migration
and reset handling.

We don't put ID-register checks on the handling of these registers,
because they are all in the only-in-v4 extra register frames, so
they're not accessible in a GICv3.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-24-peter.maydell@linaro.org

hw/intc/arm_gicv3_common.c

@@ -144,6 +144,25 @@ const VMStateDescription vmstate_gicv3_cpu_sre_el1 = {
     }
 };
 
+static bool gicv4_needed(void *opaque)
+{
+    GICv3CPUState *cs = opaque;
+
+    return cs->gic->revision > 3;
+}
+
+const VMStateDescription vmstate_gicv3_gicv4 = {
+    .name = "arm_gicv3_cpu/gicv4",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = gicv4_needed,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT64(gicr_vpropbaser, GICv3CPUState),
+        VMSTATE_UINT64(gicr_vpendbaser, GICv3CPUState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_gicv3_cpu = {
     .name = "arm_gicv3_cpu",
     .version_id = 1,
@@ -175,6 +194,7 @@ static const VMStateDescription vmstate_gicv3_cpu = {
     .subsections = (const VMStateDescription * []) {
         &vmstate_gicv3_cpu_virt,
         &vmstate_gicv3_cpu_sre_el1,
+        &vmstate_gicv3_gicv4,
         NULL
     }
 };
@@ -444,6 +464,8 @@ static void arm_gicv3_common_reset(DeviceState *dev)
         cs->gicr_waker = GICR_WAKER_ProcessorSleep | GICR_WAKER_ChildrenAsleep;
         cs->gicr_propbaser = 0;
         cs->gicr_pendbaser = 0;
+        cs->gicr_vpropbaser = 0;
+        cs->gicr_vpendbaser = 0;
         /* If we're resetting a TZ-aware GIC as if secure firmware
          * had set it up ready to start a kernel in non-secure, we
          * need to set interrupts to group 1 so the kernel can use them.

hw/intc/arm_gicv3_redist.c

@@ -236,6 +236,23 @@ static MemTxResult gicr_readl(GICv3CPUState *cs, hwaddr offset,
     case GICR_IDREGS ... GICR_IDREGS + 0x2f:
         *data = gicv3_idreg(offset - GICR_IDREGS, GICV3_PIDR0_REDIST);
         return MEMTX_OK;
+        /*
+         * VLPI frame registers. We don't need a version check for
+         * VPROPBASER and VPENDBASER because gicv3_redist_size() will
+         * prevent pre-v4 GIC from passing us offsets this high.
+         */
+    case GICR_VPROPBASER:
+        *data = extract64(cs->gicr_vpropbaser, 0, 32);
+        return MEMTX_OK;
+    case GICR_VPROPBASER + 4:
+        *data = extract64(cs->gicr_vpropbaser, 32, 32);
+        return MEMTX_OK;
+    case GICR_VPENDBASER:
+        *data = extract64(cs->gicr_vpendbaser, 0, 32);
+        return MEMTX_OK;
+    case GICR_VPENDBASER + 4:
+        *data = extract64(cs->gicr_vpendbaser, 32, 32);
+        return MEMTX_OK;
     default:
         return MEMTX_ERROR;
     }
@@ -379,6 +396,23 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
                       "%s: invalid guest write to RO register at offset "
                       TARGET_FMT_plx "\n", __func__, offset);
         return MEMTX_OK;
+        /*
+         * VLPI frame registers. We don't need a version check for
+         * VPROPBASER and VPENDBASER because gicv3_redist_size() will
+         * prevent pre-v4 GIC from passing us offsets this high.
+         */
+    case GICR_VPROPBASER:
+        cs->gicr_vpropbaser = deposit64(cs->gicr_vpropbaser, 0, 32, value);
+        return MEMTX_OK;
+    case GICR_VPROPBASER + 4:
+        cs->gicr_vpropbaser = deposit64(cs->gicr_vpropbaser, 32, 32, value);
+        return MEMTX_OK;
+    case GICR_VPENDBASER:
+        cs->gicr_vpendbaser = deposit64(cs->gicr_vpendbaser, 0, 32, value);
+        return MEMTX_OK;
+    case GICR_VPENDBASER + 4:
+        cs->gicr_vpendbaser = deposit64(cs->gicr_vpendbaser, 32, 32, value);
+        return MEMTX_OK;
     default:
         return MEMTX_ERROR;
     }
@@ -397,6 +431,17 @@ static MemTxResult gicr_readll(GICv3CPUState *cs, hwaddr offset,
     case GICR_PENDBASER:
         *data = cs->gicr_pendbaser;
         return MEMTX_OK;
+        /*
+         * VLPI frame registers. We don't need a version check for
+         * VPROPBASER and VPENDBASER because gicv3_redist_size() will
+         * prevent pre-v4 GIC from passing us offsets this high.
+         */
+    case GICR_VPROPBASER:
+        *data = cs->gicr_vpropbaser;
+        return MEMTX_OK;
+    case GICR_VPENDBASER:
+        *data = cs->gicr_vpendbaser;
+        return MEMTX_OK;
     default:
         return MEMTX_ERROR;
     }
@@ -418,6 +463,17 @@ static MemTxResult gicr_writell(GICv3CPUState *cs, hwaddr offset,
                       "%s: invalid guest write to RO register at offset "
                       TARGET_FMT_plx "\n", __func__, offset);
         return MEMTX_OK;
+        /*
+         * VLPI frame registers. We don't need a version check for
+         * VPROPBASER and VPENDBASER because gicv3_redist_size() will
+         * prevent pre-v4 GIC from passing us offsets this high.
+         */
+    case GICR_VPROPBASER:
+        cs->gicr_vpropbaser = value;
+        return MEMTX_OK;
+    case GICR_VPENDBASER:
+        cs->gicr_vpendbaser = value;
+        return MEMTX_OK;
     default:
         return MEMTX_ERROR;
     }

hw/intc/gicv3_internal.h

@@ -77,6 +77,7 @@
  * Redistributor frame offsets from RD_base
  */
 #define GICR_SGI_OFFSET 0x10000
+#define GICR_VLPI_OFFSET 0x20000
 
 /*
  * Redistributor registers, offsets from RD_base
@@ -109,6 +110,10 @@
 #define GICR_IGRPMODR0        (GICR_SGI_OFFSET + 0x0D00)
 #define GICR_NSACR            (GICR_SGI_OFFSET + 0x0E00)
 
+/* VLPI redistributor registers, offsets from VLPI_base */
+#define GICR_VPROPBASER       (GICR_VLPI_OFFSET + 0x70)
+#define GICR_VPENDBASER       (GICR_VLPI_OFFSET + 0x78)
+
 #define GICR_CTLR_ENABLE_LPIS        (1U << 0)
 #define GICR_CTLR_CES                (1U << 1)
 #define GICR_CTLR_RWP                (1U << 3)
@@ -143,6 +148,22 @@ FIELD(GICR_PENDBASER, PTZ, 62, 1)
 
 #define GICR_PROPBASER_IDBITS_THRESHOLD          0xd
 
+/* These are the GICv4 VPROPBASER and VPENDBASER layouts; v4.1 is different */
+FIELD(GICR_VPROPBASER, IDBITS, 0, 5)
+FIELD(GICR_VPROPBASER, INNERCACHE, 7, 3)
+FIELD(GICR_VPROPBASER, SHAREABILITY, 10, 2)
+FIELD(GICR_VPROPBASER, PHYADDR, 12, 40)
+FIELD(GICR_VPROPBASER, OUTERCACHE, 56, 3)
+
+FIELD(GICR_VPENDBASER, INNERCACHE, 7, 3)
+FIELD(GICR_VPENDBASER, SHAREABILITY, 10, 2)
+FIELD(GICR_VPENDBASER, PHYADDR, 16, 36)
+FIELD(GICR_VPENDBASER, OUTERCACHE, 56, 3)
+FIELD(GICR_VPENDBASER, DIRTY, 60, 1)
+FIELD(GICR_VPENDBASER, PENDINGLAST, 61, 1)
+FIELD(GICR_VPENDBASER, IDAI, 62, 1)
+FIELD(GICR_VPENDBASER, VALID, 63, 1)
+
 #define ICC_CTLR_EL1_CBPR           (1U << 0)
 #define ICC_CTLR_EL1_EOIMODE        (1U << 1)
 #define ICC_CTLR_EL1_PMHE           (1U << 6)

include/hw/intc/arm_gicv3_common.h

@@ -179,6 +179,9 @@ struct GICv3CPUState {
     uint32_t gicr_igrpmodr0;
     uint32_t gicr_nsacr;
     uint8_t gicr_ipriorityr[GIC_INTERNAL];
+    /* VLPI_base page registers */
+    uint64_t gicr_vpropbaser;
+    uint64_t gicr_vpendbaser;
 
     /* CPU interface */
     uint64_t icc_sre_el1;