hw/net/smc91c111: Convert away from old_mmio

Convert the smc91c111 device away from using the old_mmio field of
MemoryRegionOps. This device is used by several Arm board models.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180427173611.10281-3-peter.maydell@linaro.org

hw/net/smc91c111.c

@@ -625,37 +625,33 @@ static uint32_t smc91c111_readb(void *opaque, hwaddr offset)
     return 0;
 }
 
-static void smc91c111_writew(void *opaque, hwaddr offset,
-                             uint32_t value)
-{
-    smc91c111_writeb(opaque, offset, value & 0xff);
-    smc91c111_writeb(opaque, offset + 1, value >> 8);
-}
-
-static void smc91c111_writel(void *opaque, hwaddr offset,
-                             uint32_t value)
+static uint64_t smc91c111_readfn(void *opaque, hwaddr addr, unsigned size)
 {
-    /* 32-bit writes to offset 0xc only actually write to the bank select
-       register (offset 0xe)  */
-    if (offset != 0xc)
-        smc91c111_writew(opaque, offset, value & 0xffff);
-    smc91c111_writew(opaque, offset + 2, value >> 16);
-}
+    int i;
+    uint32_t val = 0;
 
-static uint32_t smc91c111_readw(void *opaque, hwaddr offset)
-{
-    uint32_t val;
-    val = smc91c111_readb(opaque, offset);
-    val |= smc91c111_readb(opaque, offset + 1) << 8;
+    for (i = 0; i < size; i++) {
+        val |= smc91c111_readb(opaque, addr + i) << (i * 8);
+    }
     return val;
 }
 
-static uint32_t smc91c111_readl(void *opaque, hwaddr offset)
+static void smc91c111_writefn(void *opaque, hwaddr addr,
+                               uint64_t value, unsigned size)
 {
-    uint32_t val;
-    val = smc91c111_readw(opaque, offset);
-    val |= smc91c111_readw(opaque, offset + 2) << 16;
-    return val;
+    int i = 0;
+
+    /* 32-bit writes to offset 0xc only actually write to the bank select
+     * register (offset 0xe), so skip the first two bytes we would write.
+     */
+    if (addr == 0xc && size == 4) {
+        i += 2;
+    }
+
+    for (; i < size; i++) {
+        smc91c111_writeb(opaque, addr + i,
+                         extract32(value, i * 8, 8));
+    }
 }
 
 static int smc91c111_can_receive_nc(NetClientState *nc)
@@ -747,10 +743,10 @@ static const MemoryRegionOps smc91c111_mem_ops = {
     /* The special case for 32 bit writes to 0xc means we can't just
      * set .impl.min/max_access_size to 1, unfortunately
      */
-    .old_mmio = {
-        .read = { smc91c111_readb, smc91c111_readw, smc91c111_readl, },
-        .write = { smc91c111_writeb, smc91c111_writew, smc91c111_writel, },
-    },
+    .read = smc91c111_readfn,
+    .write = smc91c111_writefn,
+    .valid.min_access_size = 1,
+    .valid.max_access_size = 4,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };