hppa: Sync contents of hppa_hardware.h header file with SeaBIOS-hppa

The hppa_hardware.h header file holds many constants for addresses and
offsets which are needed while building the firmware (SeaBIOS-hppa) and
while setting up the virtual machine in QEMU.

This patch brings it in sync between both source code repositories.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>

hw/hppa/hppa_hardware.h

@@ -6,6 +6,11 @@
 
 #define FIRMWARE_START  0xf0000000
 #define FIRMWARE_END    0xf0800000
+#define FIRMWARE_HIGH   0xfffffff0  /* upper 32-bits of 64-bit firmware address */
+
+#define RAM_MAP_HIGH  0x0100000000  /* memory above 3.75 GB is mapped here */
+
+#define MEM_PDC_ENTRY       0x4800  /* PDC entry address */
 
 #define DEVICE_HPA_LEN  0x00100000
 
@@ -18,6 +23,7 @@
 #define LASI_UART_HPA   0xffd05000
 #define LASI_SCSI_HPA   0xffd06000
 #define LASI_LAN_HPA    0xffd07000
+#define LASI_RTC_HPA    0xffd09000
 #define LASI_LPT_HPA    0xffd02000
 #define LASI_AUDIO_HPA  0xffd04000
 #define LASI_PS2KBD_HPA 0xffd08000
@@ -27,16 +33,23 @@
 #define CPU_HPA         0xfffb0000
 #define MEMORY_HPA      0xfffff000
 
-#define PCI_HPA         DINO_HPA        /* PCI bus */
 #define IDE_HPA         0xf9000000      /* Boot disc controller */
+#define ASTRO_HPA       0xfed00000
+#define ELROY0_HPA      0xfed30000
+#define ELROY2_HPA      0xfed32000
+#define ELROY8_HPA      0xfed38000
+#define ELROYc_HPA      0xfed3c000
+#define ASTRO_MEMORY_HPA 0xfed10200
+
+#define SCSI_HPA        0xf1040000      /* emulated SCSI, needs to be in f region */
 
 /* offsets to DINO HPA: */
 #define DINO_PCI_ADDR           0x064
 #define DINO_CONFIG_DATA        0x068
 #define DINO_IO_DATA            0x06c
 
-#define PORT_PCI_CMD    (PCI_HPA + DINO_PCI_ADDR)
-#define PORT_PCI_DATA   (PCI_HPA + DINO_CONFIG_DATA)
+#define PORT_PCI_CMD    hppa_port_pci_cmd
+#define PORT_PCI_DATA   hppa_port_pci_data
 
 #define FW_CFG_IO_BASE  0xfffa0000
 
@@ -46,9 +59,24 @@
 #define HPPA_MAX_CPUS   16      /* max. number of SMP CPUs */
 #define CPU_CLOCK_MHZ   250     /* emulate a 250 MHz CPU */
 
+#define CR_PSW_DEFAULT  6       /* used by SeaBIOS & QEMU for default PSW */
 #define CPU_HPA_CR_REG  7       /* store CPU HPA in cr7 (SeaBIOS internal) */
 #define PIM_STORAGE_SIZE 600	/* storage size of pdc_pim_toc_struct (64bit) */
 
-#define RAM_MAP_HIGH  0x0100000000  /* memory above 3.75 GB is mapped here */
+#define ASTRO_BUS_MODULE        0x0a            /* C3700: 0x0a, others maybe 0 ? */
+
+/* ASTRO Memory and I/O regions */
+#define ASTRO_BASE_HPA            0xfffed00000
+#define ELROY0_BASE_HPA           0xfffed30000  /* ELROY0_HPA */
+
+#define ROPES_PER_IOC           8       /* per Ike half or Pluto/Astro */
+
+#define LMMIO_DIRECT0_BASE  0x300
+#define LMMIO_DIRECT0_MASK  0x308
+#define LMMIO_DIRECT0_ROUTE 0x310
+
+/* space register hashing */
+#define HPPA64_DIAG_SPHASH_ENABLE       0x200   /* DIAG_SPHASH_ENAB (bit 54) */
+#define HPPA64_PDC_CACHE_RET_SPID_VAL   0xfe0   /* PDC return value on 64-bit CPU */
 
 #endif