hw/arm: Remove 'n800' and 'n810' machines

Remove the 'n800' and 'n810' machine types, which modelled
Nokia internet tablets. These were deprecated in 9.0 and
so we can remove them for 9.2.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-26-peter.maydell@linaro.org
[PMM: added removal of arm-n800-machine.c post-review]

MAINTAINERS

@@ -874,7 +874,6 @@ nSeries
 M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
 S: Odd Fixes
-F: hw/arm/nseries.c
 F: hw/display/blizzard.c
 F: hw/input/lm832x.c
 F: hw/input/tsc2005.c
@@ -885,8 +884,6 @@ F: include/hw/display/blizzard.h
 F: include/hw/input/lm832x.h
 F: include/hw/input/tsc2xxx.h
 F: include/hw/misc/cbus.h
-F: tests/avocado/machine_arm_n8x0.py
-F: docs/system/arm/nseries.rst
 
 Raspberry Pi
 M: Peter Maydell <peter.maydell@linaro.org>

configs/devices/arm-softmmu/default.mak

@@ -19,7 +19,6 @@
 # CONFIG_MPS3R=n
 # CONFIG_MUSCA=n
 # CONFIG_SX1=n
-# CONFIG_NSERIES=n
 # CONFIG_STELLARIS=n
 # CONFIG_STM32VLDISCOVERY=n
 # CONFIG_B_L475E_IOT01A=n

docs/system/arm/nseries.rst

@@ -1,33 +0,0 @@
-Nokia N800 and N810 tablets (``n800``, ``n810``)
-================================================
-
-Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 /
-48) emulation supports the following elements:
-
--  Texas Instruments OMAP2420 System-on-chip (ARM1136 core)
-
--  RAM and non-volatile OneNAND Flash memories
-
--  Display connected to EPSON remote framebuffer chip and OMAP on-chip
-   display controller and a LS041y3 MIPI DBI-C controller
-
--  TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen
-   controllers driven through SPI bus
-
--  National Semiconductor LM8323-controlled qwerty keyboard driven
-   through |I2C| bus
-
--  Secure Digital card connected to OMAP MMC/SD host
-
--  Three OMAP on-chip UARTs and on-chip STI debugging console
-
--  Mentor Graphics \"Inventra\" dual-role USB controller embedded in a
-   TI TUSB6010 chip - only USB host mode is supported
-
--  TI TMP105 temperature sensor driven through |I2C| bus
-
--  TI TWL92230C power management companion with an RTC on
-   |I2C| bus
-
--  Nokia RETU and TAHVO multi-purpose chips with an RTC, connected
-   through CBUS

docs/system/target-arm.rst

@@ -92,7 +92,6 @@ undocumented; you can get a complete list by running
    arm/emcraft-sf2
    arm/musicpal
    arm/kzm
-   arm/nseries
    arm/nrf
    arm/nuvoton
    arm/imx25-pdk

hw/arm/meson.build

@@ -12,7 +12,6 @@ arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c'))
 arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c'))
 arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c'))
 arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c'))
-arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c'))
 arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c'))
 arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c'))
 arm_ss.add(when: 'CONFIG_STELLARIS', if_true: files('stellaris.c'))

hw/arm/nseries.c

@@ -1,1473 +0,0 @@
-/*
- * Nokia N-series internet tablets.
- *
- * Copyright (C) 2007 Nokia Corporation
- * Written by Andrzej Zaborowski <andrew@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "cpu.h"
-#include "chardev/char.h"
-#include "qemu/cutils.h"
-#include "qemu/bswap.h"
-#include "qemu/hw-version.h"
-#include "sysemu/reset.h"
-#include "sysemu/runstate.h"
-#include "sysemu/sysemu.h"
-#include "hw/arm/omap.h"
-#include "hw/arm/boot.h"
-#include "hw/irq.h"
-#include "ui/console.h"
-#include "hw/boards.h"
-#include "hw/i2c/i2c.h"
-#include "hw/display/blizzard.h"
-#include "hw/input/lm832x.h"
-#include "hw/input/tsc2xxx.h"
-#include "hw/misc/cbus.h"
-#include "hw/sensor/tmp105.h"
-#include "hw/qdev-properties.h"
-#include "hw/block/flash.h"
-#include "hw/hw.h"
-#include "hw/loader.h"
-#include "hw/sysbus.h"
-#include "qemu/log.h"
-#include "qemu/error-report.h"
-
-
-/* Nokia N8x0 support */
-struct n800_s {
-    struct omap_mpu_state_s *mpu;
-
-    struct rfbi_chip_s blizzard;
-    struct {
-        void *opaque;
-        uint32_t (*txrx)(void *opaque, uint32_t value, int len);
-        uWireSlave *chip;
-    } ts;
-
-    int keymap[0x80];
-    DeviceState *kbd;
-
-    DeviceState *usb;
-    void *retu;
-    void *tahvo;
-    DeviceState *nand;
-};
-
-/* GPIO pins */
-#define N8X0_TUSB_ENABLE_GPIO		0
-#define N800_MMC2_WP_GPIO		8
-#define N800_UNKNOWN_GPIO0		9	/* out */
-#define N810_MMC2_VIOSD_GPIO		9
-#define N810_HEADSET_AMP_GPIO		10
-#define N800_CAM_TURN_GPIO		12
-#define N810_GPS_RESET_GPIO		12
-#define N800_BLIZZARD_POWERDOWN_GPIO	15
-#define N800_MMC1_WP_GPIO		23
-#define N810_MMC2_VSD_GPIO		23
-#define N8X0_ONENAND_GPIO		26
-#define N810_BLIZZARD_RESET_GPIO	30
-#define N800_UNKNOWN_GPIO2		53	/* out */
-#define N8X0_TUSB_INT_GPIO		58
-#define N8X0_BT_WKUP_GPIO		61
-#define N8X0_STI_GPIO			62
-#define N8X0_CBUS_SEL_GPIO		64
-#define N8X0_CBUS_DAT_GPIO		65
-#define N8X0_CBUS_CLK_GPIO		66
-#define N8X0_WLAN_IRQ_GPIO		87
-#define N8X0_BT_RESET_GPIO		92
-#define N8X0_TEA5761_CS_GPIO		93
-#define N800_UNKNOWN_GPIO		94
-#define N810_TSC_RESET_GPIO		94
-#define N800_CAM_ACT_GPIO		95
-#define N810_GPS_WAKEUP_GPIO		95
-#define N8X0_MMC_CS_GPIO		96
-#define N8X0_WLAN_PWR_GPIO		97
-#define N8X0_BT_HOST_WKUP_GPIO		98
-#define N810_SPEAKER_AMP_GPIO		101
-#define N810_KB_LOCK_GPIO		102
-#define N800_TSC_TS_GPIO		103
-#define N810_TSC_TS_GPIO		106
-#define N8X0_HEADPHONE_GPIO		107
-#define N8X0_RETU_GPIO			108
-#define N800_TSC_KP_IRQ_GPIO		109
-#define N810_KEYBOARD_GPIO		109
-#define N800_BAT_COVER_GPIO		110
-#define N810_SLIDE_GPIO			110
-#define N8X0_TAHVO_GPIO			111
-#define N800_UNKNOWN_GPIO4		112	/* out */
-#define N810_SLEEPX_LED_GPIO		112
-#define N800_TSC_RESET_GPIO		118	/* ? */
-#define N810_AIC33_RESET_GPIO		118
-#define N800_TSC_UNKNOWN_GPIO		119	/* out */
-#define N8X0_TMP105_GPIO		125
-
-/* Config */
-#define BT_UART				0
-#define XLDR_LL_UART			1
-
-/* Addresses on the I2C bus 0 */
-#define N810_TLV320AIC33_ADDR		0x18	/* Audio CODEC */
-#define N8X0_TCM825x_ADDR		0x29	/* Camera */
-#define N810_LP5521_ADDR		0x32	/* LEDs */
-#define N810_TSL2563_ADDR		0x3d	/* Light sensor */
-#define N810_LM8323_ADDR		0x45	/* Keyboard */
-/* Addresses on the I2C bus 1 */
-#define N8X0_TMP105_ADDR		0x48	/* Temperature sensor */
-#define N8X0_MENELAUS_ADDR		0x72	/* Power management */
-
-/* Chipselects on GPMC NOR interface */
-#define N8X0_ONENAND_CS			0
-#define N8X0_USB_ASYNC_CS		1
-#define N8X0_USB_SYNC_CS		4
-
-#define N8X0_BD_ADDR			0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81
-
-static void n800_mmc_cs_cb(void *opaque, int line, int level)
-{
-    /* TODO: this seems to actually be connected to the menelaus, to
-     * which also both MMC slots connect.  */
-    omap_mmc_enable((struct omap_mmc_s *) opaque, !level);
-}
-
-static void n8x0_gpio_setup(struct n800_s *s)
-{
-    qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO,
-                          qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0));
-    qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO));
-}
-
-#define MAEMO_CAL_HEADER(...)				\
-    'C',  'o',  'n',  'F',  0x02, 0x00, 0x04, 0x00,	\
-    __VA_ARGS__,					\
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-static const uint8_t n8x0_cal_wlan_mac[] = {
-    MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c')
-    0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3,
-    0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00,
-    0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00,
-    0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00,
-};
-
-static const uint8_t n8x0_cal_bt_id[] = {
-    MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0)
-    0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96,
-    0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00,
-    N8X0_BD_ADDR,
-};
-
-static void n8x0_nand_setup(struct n800_s *s)
-{
-    char *otp_region;
-    DriveInfo *dinfo;
-
-    s->nand = qdev_new("onenand");
-    qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG);
-    /* Either 0x40 or 0x48 are OK for the device ID */
-    qdev_prop_set_uint16(s->nand, "device_id", 0x48);
-    qdev_prop_set_uint16(s->nand, "version_id", 0);
-    qdev_prop_set_int32(s->nand, "shift", 1);
-    dinfo = drive_get(IF_MTD, 0, 0);
-    if (dinfo) {
-        qdev_prop_set_drive_err(s->nand, "drive", blk_by_legacy_dinfo(dinfo),
-                                &error_fatal);
-    }
-    sysbus_realize_and_unref(SYS_BUS_DEVICE(s->nand), &error_fatal);
-    sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0,
-                       qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO));
-    omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS,
-                     sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0));
-    otp_region = onenand_raw_otp(s->nand);
-
-    memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac));
-    memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id));
-    /* XXX: in theory should also update the OOB for both pages */
-}
-
-static qemu_irq n8x0_system_powerdown;
-
-static void n8x0_powerdown_req(Notifier *n, void *opaque)
-{
-    qemu_irq_raise(n8x0_system_powerdown);
-}
-
-static Notifier n8x0_system_powerdown_notifier = {
-    .notify = n8x0_powerdown_req
-};
-
-static void n8x0_i2c_setup(struct n800_s *s)
-{
-    DeviceState *dev;
-    qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO);
-    I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
-
-    /* Attach a menelaus PM chip */
-    dev = DEVICE(i2c_slave_create_simple(i2c, "twl92230", N8X0_MENELAUS_ADDR));
-    qdev_connect_gpio_out(dev, 3,
-                          qdev_get_gpio_in(s->mpu->ih[0],
-                                           OMAP_INT_24XX_SYS_NIRQ));
-
-    n8x0_system_powerdown = qdev_get_gpio_in(dev, 3);
-    qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier);
-
-    /* Attach a TMP105 PM chip (A0 wired to ground) */
-    dev = DEVICE(i2c_slave_create_simple(i2c, TYPE_TMP105, N8X0_TMP105_ADDR));
-    qdev_connect_gpio_out(dev, 0, tmp_irq);
-}
-
-/* Touchscreen and keypad controller */
-static const MouseTransformInfo n800_pointercal = {
-    .x = 800,
-    .y = 480,
-    .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 },
-};
-
-static const MouseTransformInfo n810_pointercal = {
-    .x = 800,
-    .y = 480,
-    .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 },
-};
-
-#define RETU_KEYCODE	61	/* F3 */
-
-static void n800_key_event(void *opaque, int keycode)
-{
-    struct n800_s *s = (struct n800_s *) opaque;
-    int code = s->keymap[keycode & 0x7f];
-
-    if (code == -1) {
-        if ((keycode & 0x7f) == RETU_KEYCODE) {
-            retu_key_event(s->retu, !(keycode & 0x80));
-        }
-        return;
-    }
-
-    tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80));
-}
-
-static const int n800_keys[16] = {
-    -1,
-    72,	/* Up */
-    63,	/* Home (F5) */
-    -1,
-    75,	/* Left */
-    28,	/* Enter */
-    77,	/* Right */
-    -1,
-     1,	/* Cycle (ESC) */
-    80,	/* Down */
-    62,	/* Menu (F4) */
-    -1,
-    66,	/* Zoom- (F8) */
-    64,	/* FullScreen (F6) */
-    65,	/* Zoom+ (F7) */
-    -1,
-};
-
-static void n800_tsc_kbd_setup(struct n800_s *s)
-{
-    int i;
-
-    /* XXX: are the three pins inverted inside the chip between the
-     * tsc and the cpu (N4111)?  */
-    qemu_irq penirq = NULL;	/* NC */
-    qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO);
-    qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO);
-
-    s->ts.chip = tsc2301_init(penirq, kbirq, dav);
-    s->ts.opaque = s->ts.chip->opaque;
-    s->ts.txrx = tsc210x_txrx;
-
-    for (i = 0; i < 0x80; i++) {
-        s->keymap[i] = -1;
-    }
-    for (i = 0; i < 0x10; i++) {
-        if (n800_keys[i] >= 0) {
-            s->keymap[n800_keys[i]] = i;
-        }
-    }
-
-    qemu_add_kbd_event_handler(n800_key_event, s);
-
-    tsc210x_set_transform(s->ts.chip, &n800_pointercal);
-}
-
-static void n810_tsc_setup(struct n800_s *s)
-{
-    qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO);
-
-    s->ts.opaque = tsc2005_init(pintdav);
-    s->ts.txrx = tsc2005_txrx;
-
-    tsc2005_set_transform(s->ts.opaque, &n810_pointercal);
-}
-
-/* N810 Keyboard controller */
-static void n810_key_event(void *opaque, int keycode)
-{
-    struct n800_s *s = (struct n800_s *) opaque;
-    int code = s->keymap[keycode & 0x7f];
-
-    if (code == -1) {
-        if ((keycode & 0x7f) == RETU_KEYCODE) {
-            retu_key_event(s->retu, !(keycode & 0x80));
-        }
-        return;
-    }
-
-    lm832x_key_event(s->kbd, code, !(keycode & 0x80));
-}
-
-#define M	0
-
-static const int n810_keys[0x80] = {
-    [0x01] = 16,	/* Q */
-    [0x02] = 37,	/* K */
-    [0x03] = 24,	/* O */
-    [0x04] = 25,	/* P */
-    [0x05] = 14,	/* Backspace */
-    [0x06] = 30,	/* A */
-    [0x07] = 31,	/* S */
-    [0x08] = 32,	/* D */
-    [0x09] = 33,	/* F */
-    [0x0a] = 34,	/* G */
-    [0x0b] = 35,	/* H */
-    [0x0c] = 36,	/* J */
-
-    [0x11] = 17,	/* W */
-    [0x12] = 62,	/* Menu (F4) */
-    [0x13] = 38,	/* L */
-    [0x14] = 40,	/* ' (Apostrophe) */
-    [0x16] = 44,	/* Z */
-    [0x17] = 45,	/* X */
-    [0x18] = 46,	/* C */
-    [0x19] = 47,	/* V */
-    [0x1a] = 48,	/* B */
-    [0x1b] = 49,	/* N */
-    [0x1c] = 42,	/* Shift (Left shift) */
-    [0x1f] = 65,	/* Zoom+ (F7) */
-
-    [0x21] = 18,	/* E */
-    [0x22] = 39,	/* ; (Semicolon) */
-    [0x23] = 12,	/* - (Minus) */
-    [0x24] = 13,	/* = (Equal) */
-    [0x2b] = 56,	/* Fn (Left Alt) */
-    [0x2c] = 50,	/* M */
-    [0x2f] = 66,	/* Zoom- (F8) */
-
-    [0x31] = 19,	/* R */
-    [0x32] = 29 | M,	/* Right Ctrl */
-    [0x34] = 57,	/* Space */
-    [0x35] = 51,	/* , (Comma) */
-    [0x37] = 72 | M,	/* Up */
-    [0x3c] = 82 | M,	/* Compose (Insert) */
-    [0x3f] = 64,	/* FullScreen (F6) */
-
-    [0x41] = 20,	/* T */
-    [0x44] = 52,	/* . (Dot) */
-    [0x46] = 77 | M,	/* Right */
-    [0x4f] = 63,	/* Home (F5) */
-    [0x51] = 21,	/* Y */
-    [0x53] = 80 | M,	/* Down */
-    [0x55] = 28,	/* Enter */
-    [0x5f] =  1,	/* Cycle (ESC) */
-
-    [0x61] = 22,	/* U */
-    [0x64] = 75 | M,	/* Left */
-
-    [0x71] = 23,	/* I */
-#if 0
-    [0x75] = 28 | M,	/* KP Enter (KP Enter) */
-#else
-    [0x75] = 15,	/* KP Enter (Tab) */
-#endif
-};
-
-#undef M
-
-static void n810_kbd_setup(struct n800_s *s)
-{
-    qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO);
-    int i;
-
-    for (i = 0; i < 0x80; i++) {
-        s->keymap[i] = -1;
-    }
-    for (i = 0; i < 0x80; i++) {
-        if (n810_keys[i] > 0) {
-            s->keymap[n810_keys[i]] = i;
-        }
-    }
-
-    qemu_add_kbd_event_handler(n810_key_event, s);
-
-    /* Attach the LM8322 keyboard to the I2C bus,
-     * should happen in n8x0_i2c_setup and s->kbd be initialised here.  */
-    s->kbd = DEVICE(i2c_slave_create_simple(omap_i2c_bus(s->mpu->i2c[0]),
-                                            TYPE_LM8323, N810_LM8323_ADDR));
-    qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
-}
-
-/* LCD MIPI DBI-C controller (URAL) */
-struct mipid_s {
-    int resp[4];
-    int param[4];
-    int p;
-    int pm;
-    int cmd;
-
-    int sleep;
-    int booster;
-    int te;
-    int selfcheck;
-    int partial;
-    int normal;
-    int vscr;
-    int invert;
-    int onoff;
-    int gamma;
-    uint32_t id;
-};
-
-static void mipid_reset(struct mipid_s *s)
-{
-    s->pm = 0;
-    s->cmd = 0;
-
-    s->sleep = 1;
-    s->booster = 0;
-    s->selfcheck =
-            (1 << 7) |	/* Register loading OK.  */
-            (1 << 5) |	/* The chip is attached.  */
-            (1 << 4);	/* Display glass still in one piece.  */
-    s->te = 0;
-    s->partial = 0;
-    s->normal = 1;
-    s->vscr = 0;
-    s->invert = 0;
-    s->onoff = 1;
-    s->gamma = 0;
-}
-
-static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len)
-{
-    struct mipid_s *s = (struct mipid_s *) opaque;
-    uint8_t ret;
-
-    if (len > 9) {
-        hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len);
-    }
-
-    if (s->p >= ARRAY_SIZE(s->resp)) {
-        ret = 0;
-    } else {
-        ret = s->resp[s->p++];
-    }
-    if (s->pm-- > 0) {
-        s->param[s->pm] = cmd;
-    } else {
-        s->cmd = cmd;
-    }
-
-    switch (s->cmd) {
-    case 0x00:	/* NOP */
-        break;
-
-    case 0x01:	/* SWRESET */
-        mipid_reset(s);
-        break;
-
-    case 0x02:	/* BSTROFF */
-        s->booster = 0;
-        break;
-    case 0x03:	/* BSTRON */
-        s->booster = 1;
-        break;
-
-    case 0x04:	/* RDDID */
-        s->p = 0;
-        s->resp[0] = (s->id >> 16) & 0xff;
-        s->resp[1] = (s->id >>  8) & 0xff;
-        s->resp[2] = (s->id >>  0) & 0xff;
-        break;
-
-    case 0x06:	/* RD_RED */
-    case 0x07:	/* RD_GREEN */
-        /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so
-         * for the bootloader one needs to change this.  */
-    case 0x08:	/* RD_BLUE */
-        s->p = 0;
-        /* TODO: return first pixel components */
-        s->resp[0] = 0x01;
-        break;
-
-    case 0x09:	/* RDDST */
-        s->p = 0;
-        s->resp[0] = s->booster << 7;
-        s->resp[1] = (5 << 4) | (s->partial << 2) |
-                (s->sleep << 1) | s->normal;
-        s->resp[2] = (s->vscr << 7) | (s->invert << 5) |
-                (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2);
-        s->resp[3] = s->gamma << 6;
-        break;
-
-    case 0x0a:	/* RDDPM */
-        s->p = 0;
-        s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) |
-                (s->partial << 5) | (s->sleep << 6) | (s->booster << 7);
-        break;
-    case 0x0b:	/* RDDMADCTR */
-        s->p = 0;
-        s->resp[0] = 0;
-        break;
-    case 0x0c:	/* RDDCOLMOD */
-        s->p = 0;
-        s->resp[0] = 5;	/* 65K colours */
-        break;
-    case 0x0d:	/* RDDIM */
-        s->p = 0;
-        s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma;
-        break;
-    case 0x0e:	/* RDDSM */
-        s->p = 0;
-        s->resp[0] = s->te << 7;
-        break;
-    case 0x0f:	/* RDDSDR */
-        s->p = 0;
-        s->resp[0] = s->selfcheck;
-        break;
-
-    case 0x10:	/* SLPIN */
-        s->sleep = 1;
-        break;
-    case 0x11:	/* SLPOUT */
-        s->sleep = 0;
-        s->selfcheck ^= 1 << 6;	/* POFF self-diagnosis Ok */
-        break;
-
-    case 0x12:	/* PTLON */
-        s->partial = 1;
-        s->normal = 0;
-        s->vscr = 0;
-        break;
-    case 0x13:	/* NORON */
-        s->partial = 0;
-        s->normal = 1;
-        s->vscr = 0;
-        break;
-
-    case 0x20:	/* INVOFF */
-        s->invert = 0;
-        break;
-    case 0x21:	/* INVON */
-        s->invert = 1;
-        break;
-
-    case 0x22:	/* APOFF */
-    case 0x23:	/* APON */
-        goto bad_cmd;
-
-    case 0x25:	/* WRCNTR */
-        if (s->pm < 0) {
-            s->pm = 1;
-        }
-        goto bad_cmd;
-
-    case 0x26:	/* GAMSET */
-        if (!s->pm) {
-            s->gamma = ctz32(s->param[0] & 0xf);
-            if (s->gamma == 32) {
-                s->gamma = -1; /* XXX: should this be 0? */
-            }
-        } else if (s->pm < 0) {
-            s->pm = 1;
-        }
-        break;
-
-    case 0x28:	/* DISPOFF */
-        s->onoff = 0;
-        break;
-    case 0x29:	/* DISPON */
-        s->onoff = 1;
-        break;
-
-    case 0x2a:	/* CASET */
-    case 0x2b:	/* RASET */
-    case 0x2c:	/* RAMWR */
-    case 0x2d:	/* RGBSET */
-    case 0x2e:	/* RAMRD */
-    case 0x30:	/* PTLAR */
-    case 0x33:	/* SCRLAR */
-        goto bad_cmd;
-
-    case 0x34:	/* TEOFF */
-        s->te = 0;
-        break;
-    case 0x35:	/* TEON */
-        if (!s->pm) {
-            s->te = 1;
-        } else if (s->pm < 0) {
-            s->pm = 1;
-        }
-        break;
-
-    case 0x36:	/* MADCTR */
-        goto bad_cmd;
-
-    case 0x37:	/* VSCSAD */
-        s->partial = 0;
-        s->normal = 0;
-        s->vscr = 1;
-        break;
-
-    case 0x38:	/* IDMOFF */
-    case 0x39:	/* IDMON */
-    case 0x3a:	/* COLMOD */
-        goto bad_cmd;
-
-    case 0xb0:	/* CLKINT / DISCTL */
-    case 0xb1:	/* CLKEXT */
-        if (s->pm < 0) {
-            s->pm = 2;
-        }
-        break;
-
-    case 0xb4:	/* FRMSEL */
-        break;
-
-    case 0xb5:	/* FRM8SEL */
-    case 0xb6:	/* TMPRNG / INIESC */
-    case 0xb7:	/* TMPHIS / NOP2 */
-    case 0xb8:	/* TMPREAD / MADCTL */
-    case 0xba:	/* DISTCTR */
-    case 0xbb:	/* EPVOL */
-        goto bad_cmd;
-
-    case 0xbd:	/* Unknown */
-        s->p = 0;
-        s->resp[0] = 0;
-        s->resp[1] = 1;
-        break;
-
-    case 0xc2:	/* IFMOD */
-        if (s->pm < 0) {
-            s->pm = 2;
-        }
-        break;
-
-    case 0xc6:	/* PWRCTL */
-    case 0xc7:	/* PPWRCTL */
-    case 0xd0:	/* EPWROUT */
-    case 0xd1:	/* EPWRIN */
-    case 0xd4:	/* RDEV */
-    case 0xd5:	/* RDRR */
-        goto bad_cmd;
-
-    case 0xda:	/* RDID1 */
-        s->p = 0;
-        s->resp[0] = (s->id >> 16) & 0xff;
-        break;
-    case 0xdb:	/* RDID2 */
-        s->p = 0;
-        s->resp[0] = (s->id >>  8) & 0xff;
-        break;
-    case 0xdc:	/* RDID3 */
-        s->p = 0;
-        s->resp[0] = (s->id >>  0) & 0xff;
-        break;
-
-    default:
-    bad_cmd:
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "%s: unknown command 0x%02x\n", __func__, s->cmd);
-        break;
-    }
-
-    return ret;
-}
-
-static void *mipid_init(void)
-{
-    struct mipid_s *s = g_malloc0(sizeof(*s));
-
-    s->id = 0x838f03;
-    mipid_reset(s);
-
-    return s;
-}
-
-static void n8x0_spi_setup(struct n800_s *s)
-{
-    void *tsc = s->ts.opaque;
-    void *mipid = mipid_init();
-
-    omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0);
-    omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1);
-}
-
-/* This task is normally performed by the bootloader.  If we're loading
- * a kernel directly, we need to enable the Blizzard ourselves.  */
-static void n800_dss_init(struct rfbi_chip_s *chip)
-{
-    uint8_t *fb_blank;
-
-    chip->write(chip->opaque, 0, 0x2a);		/* LCD Width register */
-    chip->write(chip->opaque, 1, 0x64);
-    chip->write(chip->opaque, 0, 0x2c);		/* LCD HNDP register */
-    chip->write(chip->opaque, 1, 0x1e);
-    chip->write(chip->opaque, 0, 0x2e);		/* LCD Height 0 register */
-    chip->write(chip->opaque, 1, 0xe0);
-    chip->write(chip->opaque, 0, 0x30);		/* LCD Height 1 register */
-    chip->write(chip->opaque, 1, 0x01);
-    chip->write(chip->opaque, 0, 0x32);		/* LCD VNDP register */
-    chip->write(chip->opaque, 1, 0x06);
-    chip->write(chip->opaque, 0, 0x68);		/* Display Mode register */
-    chip->write(chip->opaque, 1, 1);		/* Enable bit */
-
-    chip->write(chip->opaque, 0, 0x6c);	
-    chip->write(chip->opaque, 1, 0x00);		/* Input X Start Position */
-    chip->write(chip->opaque, 1, 0x00);		/* Input X Start Position */
-    chip->write(chip->opaque, 1, 0x00);		/* Input Y Start Position */
-    chip->write(chip->opaque, 1, 0x00);		/* Input Y Start Position */
-    chip->write(chip->opaque, 1, 0x1f);		/* Input X End Position */
-    chip->write(chip->opaque, 1, 0x03);		/* Input X End Position */
-    chip->write(chip->opaque, 1, 0xdf);		/* Input Y End Position */
-    chip->write(chip->opaque, 1, 0x01);		/* Input Y End Position */
-    chip->write(chip->opaque, 1, 0x00);		/* Output X Start Position */
-    chip->write(chip->opaque, 1, 0x00);		/* Output X Start Position */
-    chip->write(chip->opaque, 1, 0x00);		/* Output Y Start Position */
-    chip->write(chip->opaque, 1, 0x00);		/* Output Y Start Position */
-    chip->write(chip->opaque, 1, 0x1f);		/* Output X End Position */
-    chip->write(chip->opaque, 1, 0x03);		/* Output X End Position */
-    chip->write(chip->opaque, 1, 0xdf);		/* Output Y End Position */
-    chip->write(chip->opaque, 1, 0x01);		/* Output Y End Position */
-    chip->write(chip->opaque, 1, 0x01);		/* Input Data Format */
-    chip->write(chip->opaque, 1, 0x01);		/* Data Source Select */
-
-    fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2);
-    /* Display Memory Data Port */
-    chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800);
-    g_free(fb_blank);
-}
-
-static void n8x0_dss_setup(struct n800_s *s)
-{
-    s->blizzard.opaque = s1d13745_init(NULL);
-    s->blizzard.block = s1d13745_write_block;
-    s->blizzard.write = s1d13745_write;
-    s->blizzard.read = s1d13745_read;
-
-    omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard);
-}
-
-static void n8x0_cbus_setup(struct n800_s *s)
-{
-    qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO);
-    qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO);
-    qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO);
-
-    CBus *cbus = cbus_init(dat_out);
-
-    qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk);
-    qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat);
-    qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel);
-
-    cbus_attach(cbus, s->retu = retu_init(retu_irq, 1));
-    cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1));
-}
-
-static void n8x0_usb_setup(struct n800_s *s)
-{
-    SysBusDevice *dev;
-    s->usb = qdev_new("tusb6010");
-    dev = SYS_BUS_DEVICE(s->usb);
-    sysbus_realize_and_unref(dev, &error_fatal);
-    sysbus_connect_irq(dev, 0,
-                       qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO));
-    /* Using the NOR interface */
-    omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS,
-                     sysbus_mmio_get_region(dev, 0));
-    omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS,
-                     sysbus_mmio_get_region(dev, 1));
-    qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO,
-                          qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */
-}
-
-/* Setup done before the main bootloader starts by some early setup code
- * - used when we want to run the main bootloader in emulation.  This
- * isn't documented.  */
-static const uint32_t n800_pinout[104] = {
-    0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0,
-    0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808,
-    0x08080808, 0x180800c4, 0x00b80000, 0x08080808,
-    0x080800bc, 0x00cc0808, 0x08081818, 0x18180128,
-    0x01241800, 0x18181818, 0x000000f0, 0x01300000,
-    0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b,
-    0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080,
-    0x007c0000, 0x00000000, 0x00000088, 0x00840000,
-    0x00000000, 0x00000094, 0x00980300, 0x0f180003,
-    0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c,
-    0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008,
-    0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f,
-    0x181800f4, 0x00f81818, 0x00000018, 0x000000fc,
-    0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008,
-    0x00000000, 0x00000038, 0x00340000, 0x00000000,
-    0x1a080070, 0x00641a1a, 0x08080808, 0x08080060,
-    0x005c0808, 0x08080808, 0x08080058, 0x00540808,
-    0x08080808, 0x0808006c, 0x00680808, 0x08080808,
-    0x000000a8, 0x00b00000, 0x08080808, 0x000000a0,
-    0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808,
-    0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff,
-    0x000000ac, 0x01040800, 0x08080b0f, 0x18180100,
-    0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a,
-    0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00,
-    0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118,
-    0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b,
-};
-
-static void n800_setup_nolo_tags(void *sram_base)
-{
-    int i;
-    uint32_t *p = sram_base + 0x8000;
-    uint32_t *v = sram_base + 0xa000;
-
-    memset(p, 0, 0x3000);
-
-    strcpy((void *) (p + 0), "QEMU N800");
-
-    strcpy((void *) (p + 8), "F5");
-
-    stl_p(p + 10, 0x04f70000);
-    strcpy((void *) (p + 9), "RX-34");
-
-    /* RAM size in MB? */
-    stl_p(p + 12, 0x80);
-
-    /* Pointer to the list of tags */
-    stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000);
-
-    /* The NOLO tags start here */
-    p = sram_base + 0x9000;
-#define ADD_TAG(tag, len)				\
-    stw_p((uint16_t *) p + 0, tag);			\
-    stw_p((uint16_t *) p + 1, len); p++;		\
-    stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
-
-    /* OMAP STI console? Pin out settings? */
-    ADD_TAG(0x6e01, 414);
-    for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) {
-        stl_p(v++, n800_pinout[i]);
-    }
-
-    /* Kernel memsize? */
-    ADD_TAG(0x6e05, 1);
-    stl_p(v++, 2);
-
-    /* NOLO serial console */
-    ADD_TAG(0x6e02, 4);
-    stl_p(v++, XLDR_LL_UART);		/* UART number (1 - 3) */
-
-#if 0
-    /* CBUS settings (Retu/AVilma) */
-    ADD_TAG(0x6e03, 6);
-    stw_p((uint16_t *) v + 0, 65);	/* CBUS GPIO0 */
-    stw_p((uint16_t *) v + 1, 66);	/* CBUS GPIO1 */
-    stw_p((uint16_t *) v + 2, 64);	/* CBUS GPIO2 */
-    v += 2;
-#endif
-
-    /* Nokia ASIC BB5 (Retu/Tahvo) */
-    ADD_TAG(0x6e0a, 4);
-    stw_p((uint16_t *) v + 0, 111);	/* "Retu" interrupt GPIO */
-    stw_p((uint16_t *) v + 1, 108);	/* "Tahvo" interrupt GPIO */
-    v++;
-
-    /* LCD console? */
-    ADD_TAG(0x6e04, 4);
-    stw_p((uint16_t *) v + 0, 30);	/* ??? */
-    stw_p((uint16_t *) v + 1, 24);	/* ??? */
-    v++;
-
-#if 0
-    /* LCD settings */
-    ADD_TAG(0x6e06, 2);
-    stw_p((uint16_t *) (v++), 15);	/* ??? */
-#endif
-
-    /* I^2C (Menelaus) */
-    ADD_TAG(0x6e07, 4);
-    stl_p(v++, 0x00720000);		/* ??? */
-
-    /* Unknown */
-    ADD_TAG(0x6e0b, 6);
-    stw_p((uint16_t *) v + 0, 94);	/* ??? */
-    stw_p((uint16_t *) v + 1, 23);	/* ??? */
-    stw_p((uint16_t *) v + 2, 0);	/* ??? */
-    v += 2;
-
-    /* OMAP gpio switch info */
-    ADD_TAG(0x6e0c, 80);
-    strcpy((void *) v, "bat_cover");	v += 3;
-    stw_p((uint16_t *) v + 0, 110);	/* GPIO num ??? */
-    stw_p((uint16_t *) v + 1, 1);	/* GPIO num ??? */
-    v += 2;
-    strcpy((void *) v, "cam_act");	v += 3;
-    stw_p((uint16_t *) v + 0, 95);	/* GPIO num ??? */
-    stw_p((uint16_t *) v + 1, 32);	/* GPIO num ??? */
-    v += 2;
-    strcpy((void *) v, "cam_turn");	v += 3;
-    stw_p((uint16_t *) v + 0, 12);	/* GPIO num ??? */
-    stw_p((uint16_t *) v + 1, 33);	/* GPIO num ??? */
-    v += 2;
-    strcpy((void *) v, "headphone");	v += 3;
-    stw_p((uint16_t *) v + 0, 107);	/* GPIO num ??? */
-    stw_p((uint16_t *) v + 1, 17);	/* GPIO num ??? */
-    v += 2;
-
-    /* Bluetooth */
-    ADD_TAG(0x6e0e, 12);
-    stl_p(v++, 0x5c623d01);		/* ??? */
-    stl_p(v++, 0x00000201);		/* ??? */
-    stl_p(v++, 0x00000000);		/* ??? */
-
-    /* CX3110x WLAN settings */
-    ADD_TAG(0x6e0f, 8);
-    stl_p(v++, 0x00610025);		/* ??? */
-    stl_p(v++, 0xffff0057);		/* ??? */
-
-    /* MMC host settings */
-    ADD_TAG(0x6e10, 12);
-    stl_p(v++, 0xffff000f);		/* ??? */
-    stl_p(v++, 0xffffffff);		/* ??? */
-    stl_p(v++, 0x00000060);		/* ??? */
-
-    /* OneNAND chip select */
-    ADD_TAG(0x6e11, 10);
-    stl_p(v++, 0x00000401);		/* ??? */
-    stl_p(v++, 0x0002003a);		/* ??? */
-    stl_p(v++, 0x00000002);		/* ??? */
-
-    /* TEA5761 sensor settings */
-    ADD_TAG(0x6e12, 2);
-    stl_p(v++, 93);			/* GPIO num ??? */
-
-#if 0
-    /* Unknown tag */
-    ADD_TAG(6e09, 0);
-
-    /* Kernel UART / console */
-    ADD_TAG(6e12, 0);
-#endif
-
-    /* End of the list */
-    stl_p(p++, 0x00000000);
-    stl_p(p++, 0x00000000);
-}
-
-/* This task is normally performed by the bootloader.  If we're loading
- * a kernel directly, we need to set up GPMC mappings ourselves.  */
-static void n800_gpmc_init(struct n800_s *s)
-{
-    uint32_t config7 =
-            (0xf << 8) |	/* MASKADDRESS */
-            (1 << 6) |		/* CSVALID */
-            (4 << 0);		/* BASEADDRESS */
-
-    cpu_physical_memory_write(0x6800a078,		/* GPMC_CONFIG7_0 */
-                              &config7, sizeof(config7));
-}
-
-/* Setup sequence done by the bootloader */
-static void n8x0_boot_init(void *opaque)
-{
-    struct n800_s *s = (struct n800_s *) opaque;
-    uint32_t buf;
-
-    /* PRCM setup */
-#define omap_writel(addr, val)	\
-    buf = (val);			\
-    cpu_physical_memory_write(addr, &buf, sizeof(buf))
-
-    omap_writel(0x48008060, 0x41);		/* PRCM_CLKSRC_CTRL */
-    omap_writel(0x48008070, 1);			/* PRCM_CLKOUT_CTRL */
-    omap_writel(0x48008078, 0);			/* PRCM_CLKEMUL_CTRL */
-    omap_writel(0x48008090, 0);			/* PRCM_VOLTSETUP */
-    omap_writel(0x48008094, 0);			/* PRCM_CLKSSETUP */
-    omap_writel(0x48008098, 0);			/* PRCM_POLCTRL */
-    omap_writel(0x48008140, 2);			/* CM_CLKSEL_MPU */
-    omap_writel(0x48008148, 0);			/* CM_CLKSTCTRL_MPU */
-    omap_writel(0x48008158, 1);			/* RM_RSTST_MPU */
-    omap_writel(0x480081c8, 0x15);		/* PM_WKDEP_MPU */
-    omap_writel(0x480081d4, 0x1d4);		/* PM_EVGENCTRL_MPU */
-    omap_writel(0x480081d8, 0);			/* PM_EVEGENONTIM_MPU */
-    omap_writel(0x480081dc, 0);			/* PM_EVEGENOFFTIM_MPU */
-    omap_writel(0x480081e0, 0xc);		/* PM_PWSTCTRL_MPU */
-    omap_writel(0x48008200, 0x047e7ff7);	/* CM_FCLKEN1_CORE */
-    omap_writel(0x48008204, 0x00000004);	/* CM_FCLKEN2_CORE */
-    omap_writel(0x48008210, 0x047e7ff1);	/* CM_ICLKEN1_CORE */
-    omap_writel(0x48008214, 0x00000004);	/* CM_ICLKEN2_CORE */
-    omap_writel(0x4800821c, 0x00000000);	/* CM_ICLKEN4_CORE */
-    omap_writel(0x48008230, 0);			/* CM_AUTOIDLE1_CORE */
-    omap_writel(0x48008234, 0);			/* CM_AUTOIDLE2_CORE */
-    omap_writel(0x48008238, 7);			/* CM_AUTOIDLE3_CORE */
-    omap_writel(0x4800823c, 0);			/* CM_AUTOIDLE4_CORE */
-    omap_writel(0x48008240, 0x04360626);	/* CM_CLKSEL1_CORE */
-    omap_writel(0x48008244, 0x00000014);	/* CM_CLKSEL2_CORE */
-    omap_writel(0x48008248, 0);			/* CM_CLKSTCTRL_CORE */
-    omap_writel(0x48008300, 0x00000000);	/* CM_FCLKEN_GFX */
-    omap_writel(0x48008310, 0x00000000);	/* CM_ICLKEN_GFX */
-    omap_writel(0x48008340, 0x00000001);	/* CM_CLKSEL_GFX */
-    omap_writel(0x48008400, 0x00000004);	/* CM_FCLKEN_WKUP */
-    omap_writel(0x48008410, 0x00000004);	/* CM_ICLKEN_WKUP */
-    omap_writel(0x48008440, 0x00000000);	/* CM_CLKSEL_WKUP */
-    omap_writel(0x48008500, 0x000000cf);	/* CM_CLKEN_PLL */
-    omap_writel(0x48008530, 0x0000000c);	/* CM_AUTOIDLE_PLL */
-    omap_writel(0x48008540,			/* CM_CLKSEL1_PLL */
-                    (0x78 << 12) | (6 << 8));
-    omap_writel(0x48008544, 2);			/* CM_CLKSEL2_PLL */
-
-    /* GPMC setup */
-    n800_gpmc_init(s);
-
-    /* Video setup */
-    n800_dss_init(&s->blizzard);
-
-    /* CPU setup */
-    s->mpu->cpu->env.GE = 0x5;
-
-    /* If the machine has a slided keyboard, open it */
-    if (s->kbd) {
-        qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO));
-    }
-}
-
-#define OMAP_TAG_NOKIA_BT	0x4e01
-#define OMAP_TAG_WLAN_CX3110X	0x4e02
-#define OMAP_TAG_CBUS		0x4e03
-#define OMAP_TAG_EM_ASIC_BB5	0x4e04
-
-static const struct omap_gpiosw_info_s {
-    const char *name;
-    int line;
-    int type;
-} n800_gpiosw_info[] = {
-    {
-        "bat_cover", N800_BAT_COVER_GPIO,
-        OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
-    }, {
-        "cam_act", N800_CAM_ACT_GPIO,
-        OMAP_GPIOSW_TYPE_ACTIVITY,
-    }, {
-        "cam_turn", N800_CAM_TURN_GPIO,
-        OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED,
-    }, {
-        "headphone", N8X0_HEADPHONE_GPIO,
-        OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
-    },
-    { /* end of list */ }
-}, n810_gpiosw_info[] = {
-    {
-        "gps_reset", N810_GPS_RESET_GPIO,
-        OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
-    }, {
-        "gps_wakeup", N810_GPS_WAKEUP_GPIO,
-        OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
-    }, {
-        "headphone", N8X0_HEADPHONE_GPIO,
-        OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
-    }, {
-        "kb_lock", N810_KB_LOCK_GPIO,
-        OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
-    }, {
-        "sleepx_led", N810_SLEEPX_LED_GPIO,
-        OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT,
-    }, {
-        "slide", N810_SLIDE_GPIO,
-        OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
-    },
-    { /* end of list */ }
-};
-
-static const struct omap_partition_info_s {
-    uint32_t offset;
-    uint32_t size;
-    int mask;
-    const char *name;
-} n800_part_info[] = {
-    { 0x00000000, 0x00020000, 0x3, "bootloader" },
-    { 0x00020000, 0x00060000, 0x0, "config" },
-    { 0x00080000, 0x00200000, 0x0, "kernel" },
-    { 0x00280000, 0x00200000, 0x3, "initfs" },
-    { 0x00480000, 0x0fb80000, 0x3, "rootfs" },
-    { /* end of list */ }
-}, n810_part_info[] = {
-    { 0x00000000, 0x00020000, 0x3, "bootloader" },
-    { 0x00020000, 0x00060000, 0x0, "config" },
-    { 0x00080000, 0x00220000, 0x0, "kernel" },
-    { 0x002a0000, 0x00400000, 0x0, "initfs" },
-    { 0x006a0000, 0x0f960000, 0x0, "rootfs" },
-    { /* end of list */ }
-};
-
-static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR };
-
-static int n8x0_atag_setup(void *p, int model)
-{
-    uint8_t *b;
-    uint16_t *w;
-    uint32_t *l;
-    const struct omap_gpiosw_info_s *gpiosw;
-    const struct omap_partition_info_s *partition;
-    const char *tag;
-
-    w = p;
-
-    stw_p(w++, OMAP_TAG_UART);			/* u16 tag */
-    stw_p(w++, 4);				/* u16 len */
-    stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
-    w++;
-
-#if 0
-    stw_p(w++, OMAP_TAG_SERIAL_CONSOLE);	/* u16 tag */
-    stw_p(w++, 4);				/* u16 len */
-    stw_p(w++, XLDR_LL_UART + 1);		/* u8 console_uart */
-    stw_p(w++, 115200);				/* u32 console_speed */
-#endif
-
-    stw_p(w++, OMAP_TAG_LCD);			/* u16 tag */
-    stw_p(w++, 36);				/* u16 len */
-    strcpy((void *) w, "QEMU LCD panel");	/* char panel_name[16] */
-    w += 8;
-    strcpy((void *) w, "blizzard");		/* char ctrl_name[16] */
-    w += 8;
-    stw_p(w++, N810_BLIZZARD_RESET_GPIO);	/* TODO: n800 s16 nreset_gpio */
-    stw_p(w++, 24);				/* u8 data_lines */
-
-    stw_p(w++, OMAP_TAG_CBUS);			/* u16 tag */
-    stw_p(w++, 8);				/* u16 len */
-    stw_p(w++, N8X0_CBUS_CLK_GPIO);		/* s16 clk_gpio */
-    stw_p(w++, N8X0_CBUS_DAT_GPIO);		/* s16 dat_gpio */
-    stw_p(w++, N8X0_CBUS_SEL_GPIO);		/* s16 sel_gpio */
-    w++;
-
-    stw_p(w++, OMAP_TAG_EM_ASIC_BB5);		/* u16 tag */
-    stw_p(w++, 4);				/* u16 len */
-    stw_p(w++, N8X0_RETU_GPIO);			/* s16 retu_irq_gpio */
-    stw_p(w++, N8X0_TAHVO_GPIO);		/* s16 tahvo_irq_gpio */
-
-    gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info;
-    for (; gpiosw->name; gpiosw++) {
-        stw_p(w++, OMAP_TAG_GPIO_SWITCH);	/* u16 tag */
-        stw_p(w++, 20);				/* u16 len */
-        strcpy((void *) w, gpiosw->name);	/* char name[12] */
-        w += 6;
-        stw_p(w++, gpiosw->line);		/* u16 gpio */
-        stw_p(w++, gpiosw->type);
-        stw_p(w++, 0);
-        stw_p(w++, 0);
-    }
-
-    stw_p(w++, OMAP_TAG_NOKIA_BT);		/* u16 tag */
-    stw_p(w++, 12);				/* u16 len */
-    b = (void *) w;
-    stb_p(b++, 0x01);				/* u8 chip_type	(CSR) */
-    stb_p(b++, N8X0_BT_WKUP_GPIO);		/* u8 bt_wakeup_gpio */
-    stb_p(b++, N8X0_BT_HOST_WKUP_GPIO);		/* u8 host_wakeup_gpio */
-    stb_p(b++, N8X0_BT_RESET_GPIO);		/* u8 reset_gpio */
-    stb_p(b++, BT_UART + 1);			/* u8 bt_uart */
-    memcpy(b, &n8x0_bd_addr, 6);		/* u8 bd_addr[6] */
-    b += 6;
-    stb_p(b++, 0x02);				/* u8 bt_sysclk (38.4) */
-    w = (void *) b;
-
-    stw_p(w++, OMAP_TAG_WLAN_CX3110X);		/* u16 tag */
-    stw_p(w++, 8);				/* u16 len */
-    stw_p(w++, 0x25);				/* u8 chip_type */
-    stw_p(w++, N8X0_WLAN_PWR_GPIO);		/* s16 power_gpio */
-    stw_p(w++, N8X0_WLAN_IRQ_GPIO);		/* s16 irq_gpio */
-    stw_p(w++, -1);				/* s16 spi_cs_gpio */
-
-    stw_p(w++, OMAP_TAG_MMC);			/* u16 tag */
-    stw_p(w++, 16);				/* u16 len */
-    if (model == 810) {
-        stw_p(w++, 0x23f);			/* unsigned flags */
-        stw_p(w++, -1);				/* s16 power_pin */
-        stw_p(w++, -1);				/* s16 switch_pin */
-        stw_p(w++, -1);				/* s16 wp_pin */
-        stw_p(w++, 0x240);			/* unsigned flags */
-        stw_p(w++, 0xc000);			/* s16 power_pin */
-        stw_p(w++, 0x0248);			/* s16 switch_pin */
-        stw_p(w++, 0xc000);			/* s16 wp_pin */
-    } else {
-        stw_p(w++, 0xf);			/* unsigned flags */
-        stw_p(w++, -1);				/* s16 power_pin */
-        stw_p(w++, -1);				/* s16 switch_pin */
-        stw_p(w++, -1);				/* s16 wp_pin */
-        stw_p(w++, 0);				/* unsigned flags */
-        stw_p(w++, 0);				/* s16 power_pin */
-        stw_p(w++, 0);				/* s16 switch_pin */
-        stw_p(w++, 0);				/* s16 wp_pin */
-    }
-
-    stw_p(w++, OMAP_TAG_TEA5761);		/* u16 tag */
-    stw_p(w++, 4);				/* u16 len */
-    stw_p(w++, N8X0_TEA5761_CS_GPIO);		/* u16 enable_gpio */
-    w++;
-
-    partition = (model == 810) ? n810_part_info : n800_part_info;
-    for (; partition->name; partition++) {
-        stw_p(w++, OMAP_TAG_PARTITION);		/* u16 tag */
-        stw_p(w++, 28);				/* u16 len */
-        strcpy((void *) w, partition->name);	/* char name[16] */
-        l = (void *) (w + 8);
-        stl_p(l++, partition->size);		/* unsigned int size */
-        stl_p(l++, partition->offset);		/* unsigned int offset */
-        stl_p(l++, partition->mask);		/* unsigned int mask_flags */
-        w = (void *) l;
-    }
-
-    stw_p(w++, OMAP_TAG_BOOT_REASON);		/* u16 tag */
-    stw_p(w++, 12);				/* u16 len */
-#if 0
-    strcpy((void *) w, "por");			/* char reason_str[12] */
-    strcpy((void *) w, "charger");		/* char reason_str[12] */
-    strcpy((void *) w, "32wd_to");		/* char reason_str[12] */
-    strcpy((void *) w, "sw_rst");		/* char reason_str[12] */
-    strcpy((void *) w, "mbus");			/* char reason_str[12] */
-    strcpy((void *) w, "unknown");		/* char reason_str[12] */
-    strcpy((void *) w, "swdg_to");		/* char reason_str[12] */
-    strcpy((void *) w, "sec_vio");		/* char reason_str[12] */
-    strcpy((void *) w, "pwr_key");		/* char reason_str[12] */
-    strcpy((void *) w, "rtc_alarm");		/* char reason_str[12] */
-#else
-    strcpy((void *) w, "pwr_key");		/* char reason_str[12] */
-#endif
-    w += 6;
-
-    tag = (model == 810) ? "RX-44" : "RX-34";
-    stw_p(w++, OMAP_TAG_VERSION_STR);		/* u16 tag */
-    stw_p(w++, 24);				/* u16 len */
-    strcpy((void *) w, "product");		/* char component[12] */
-    w += 6;
-    strcpy((void *) w, tag);			/* char version[12] */
-    w += 6;
-
-    stw_p(w++, OMAP_TAG_VERSION_STR);		/* u16 tag */
-    stw_p(w++, 24);				/* u16 len */
-    strcpy((void *) w, "hw-build");		/* char component[12] */
-    w += 6;
-    strcpy((void *) w, "QEMU ");
-    pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */
-    w += 6;
-
-    tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu";
-    stw_p(w++, OMAP_TAG_VERSION_STR);		/* u16 tag */
-    stw_p(w++, 24);				/* u16 len */
-    strcpy((void *) w, "nolo");			/* char component[12] */
-    w += 6;
-    strcpy((void *) w, tag);			/* char version[12] */
-    w += 6;
-
-    return (void *) w - p;
-}
-
-static int n800_atag_setup(const struct arm_boot_info *info, void *p)
-{
-    return n8x0_atag_setup(p, 800);
-}
-
-static int n810_atag_setup(const struct arm_boot_info *info, void *p)
-{
-    return n8x0_atag_setup(p, 810);
-}
-
-static void n8x0_init(MachineState *machine,
-                      struct arm_boot_info *binfo, int model)
-{
-    struct n800_s *s = g_malloc0(sizeof(*s));
-    MachineClass *mc = MACHINE_GET_CLASS(machine);
-
-    if (machine->ram_size != mc->default_ram_size) {
-        char *sz = size_to_str(mc->default_ram_size);
-        error_report("Invalid RAM size, should be %s", sz);
-        g_free(sz);
-        exit(EXIT_FAILURE);
-    }
-    binfo->ram_size = machine->ram_size;
-
-    memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE,
-                                machine->ram);
-
-    s->mpu = omap2420_mpu_init(machine->ram, machine->cpu_type);
-
-    /* Setup peripherals
-     *
-     * Believed external peripherals layout in the N810:
-     * (spi bus 1)
-     *   tsc2005
-     *   lcd_mipid
-     * (spi bus 2)
-     *   Conexant cx3110x (WLAN)
-     *   optional: pc2400m (WiMAX)
-     * (i2c bus 0)
-     *   TLV320AIC33 (audio codec)
-     *   TCM825x (camera by Toshiba)
-     *   lp5521 (clever LEDs)
-     *   tsl2563 (light sensor, hwmon, model 7, rev. 0)
-     *   lm8323 (keypad, manf 00, rev 04)
-     * (i2c bus 1)
-     *   tmp105 (temperature sensor, hwmon)
-     *   menelaus (pm)
-     * (somewhere on i2c - maybe N800-only)
-     *   tea5761 (FM tuner)
-     * (serial 0)
-     *   GPS
-     * (some serial port)
-     *   csr41814 (Bluetooth)
-     */
-    n8x0_gpio_setup(s);
-    n8x0_nand_setup(s);
-    n8x0_i2c_setup(s);
-    if (model == 800) {
-        n800_tsc_kbd_setup(s);
-    } else if (model == 810) {
-        n810_tsc_setup(s);
-        n810_kbd_setup(s);
-    }
-    n8x0_spi_setup(s);
-    n8x0_dss_setup(s);
-    n8x0_cbus_setup(s);
-    n8x0_usb_setup(s);
-
-    if (machine->kernel_filename) {
-        /* Or at the linux loader.  */
-        arm_load_kernel(s->mpu->cpu, machine, binfo);
-
-        qemu_register_reset(n8x0_boot_init, s);
-    }
-
-    if (option_rom[0].name &&
-        (machine->boot_config.order[0] == 'n' || !machine->kernel_filename)) {
-        uint8_t *nolo_tags = g_new(uint8_t, 0x10000);
-        /* No, wait, better start at the ROM.  */
-        s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000;
-
-        /*
-         * This is intended for loading the `secondary.bin' program from
-         * Nokia images (the NOLO bootloader).  The entry point seems
-         * to be at OMAP2_Q2_BASE + 0x400000.
-         *
-         * The `2nd.bin' files contain some kind of earlier boot code and
-         * for them the entry point needs to be set to OMAP2_SRAM_BASE.
-         *
-         * The code above is for loading the `zImage' file from Nokia
-         * images.
-         */
-        if (load_image_targphys(option_rom[0].name,
-                                OMAP2_Q2_BASE + 0x400000,
-                                machine->ram_size - 0x400000) < 0) {
-            error_report("Failed to load secondary bootloader %s",
-                         option_rom[0].name);
-            exit(EXIT_FAILURE);
-        }
-
-        n800_setup_nolo_tags(nolo_tags);
-        cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000);
-        g_free(nolo_tags);
-    }
-}
-
-static struct arm_boot_info n800_binfo = {
-    .loader_start = OMAP2_Q2_BASE,
-    .board_id = 0x4f7,
-    .atag_board = n800_atag_setup,
-};
-
-static struct arm_boot_info n810_binfo = {
-    .loader_start = OMAP2_Q2_BASE,
-    /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not
-     * used by some older versions of the bootloader and 5555 is used
-     * instead (including versions that shipped with many devices).  */
-    .board_id = 0x60c,
-    .atag_board = n810_atag_setup,
-};
-
-static void n800_init(MachineState *machine)
-{
-    n8x0_init(machine, &n800_binfo, 800);
-}
-
-static void n810_init(MachineState *machine)
-{
-    n8x0_init(machine, &n810_binfo, 810);
-}
-
-static void n800_class_init(ObjectClass *oc, void *data)
-{
-    MachineClass *mc = MACHINE_CLASS(oc);
-
-    mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)";
-    mc->init = n800_init;
-    mc->default_boot_order = "";
-    mc->ignore_memory_transaction_failures = true;
-    mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
-    /* Actually two chips of 0x4000000 bytes each */
-    mc->default_ram_size = 0x08000000;
-    mc->default_ram_id = "omap2.dram";
-    mc->deprecation_reason = "machine is old and unmaintained";
-
-    machine_add_audiodev_property(mc);
-}
-
-static const TypeInfo n800_type = {
-    .name = MACHINE_TYPE_NAME("n800"),
-    .parent = TYPE_MACHINE,
-    .class_init = n800_class_init,
-};
-
-static void n810_class_init(ObjectClass *oc, void *data)
-{
-    MachineClass *mc = MACHINE_CLASS(oc);
-
-    mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)";
-    mc->init = n810_init;
-    mc->default_boot_order = "";
-    mc->ignore_memory_transaction_failures = true;
-    mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
-    /* Actually two chips of 0x4000000 bytes each */
-    mc->default_ram_size = 0x08000000;
-    mc->default_ram_id = "omap2.dram";
-    mc->deprecation_reason = "machine is old and unmaintained";
-
-    machine_add_audiodev_property(mc);
-}
-
-static const TypeInfo n810_type = {
-    .name = MACHINE_TYPE_NAME("n810"),
-    .parent = TYPE_MACHINE,
-    .class_init = n810_class_init,
-};
-
-static void nseries_machine_init(void)
-{
-    type_register_static(&n800_type);
-    type_register_static(&n810_type);
-}
-
-type_init(nseries_machine_init)

tests/avocado/machine_arm_n8x0.py

@@ -1,49 +0,0 @@
-# Functional test that boots a Linux kernel and checks the console
-#
-# Copyright (c) 2020 Red Hat, Inc.
-#
-# Author:
-#  Thomas Huth <thuth@redhat.com>
-#
-# This work is licensed under the terms of the GNU GPL, version 2 or
-# later.  See the COPYING file in the top-level directory.
-
-import os
-
-from avocado import skipUnless
-from avocado_qemu import QemuSystemTest
-from avocado_qemu import wait_for_console_pattern
-
-class N8x0Machine(QemuSystemTest):
-    """Boots the Linux kernel and checks that the console is operational"""
-
-    timeout = 90
-
-    def __do_test_n8x0(self):
-        kernel_url = ('http://stskeeps.subnetmask.net/meego-n8x0/'
-                      'meego-arm-n8x0-1.0.80.20100712.1431-'
-                      'vmlinuz-2.6.35~rc4-129.1-n8x0')
-        kernel_hash = 'e9d5ab8d7548923a0061b6fbf601465e479ed269'
-        kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
-
-        self.vm.set_console(console_index=1)
-        self.vm.add_args('-kernel', kernel_path,
-                         '-append', 'printk.time=0 console=ttyS1')
-        self.vm.launch()
-        wait_for_console_pattern(self, 'TSC2005 driver initializing')
-
-    @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
-    def test_n800(self):
-        """
-        :avocado: tags=arch:arm
-        :avocado: tags=machine:n800
-        """
-        self.__do_test_n8x0()
-
-    @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
-    def test_n810(self):
-        """
-        :avocado: tags=arch:arm
-        :avocado: tags=machine:n810
-        """
-        self.__do_test_n8x0()

tests/qtest/libqos/arm-n800-machine.c

@@ -1,92 +0,0 @@
-/*
- * libqos driver framework
- *
- * Copyright (c) 2019 Red Hat, Inc.
- *
- * Author: Paolo Bonzini <pbonzini@redhat.com>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License version 2.1 as published by the Free Software Foundation.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see <http://www.gnu.org/licenses/>
- */
-
-#include "qemu/osdep.h"
-#include "../libqtest.h"
-#include "libqos-malloc.h"
-#include "qgraph.h"
-#include "i2c.h"
-
-#define ARM_PAGE_SIZE            4096
-#define N800_RAM_START      0x80000000
-#define N800_RAM_END        0x88000000
-
-typedef struct QN800Machine QN800Machine;
-
-struct QN800Machine {
-    QOSGraphObject obj;
-    QGuestAllocator alloc;
-    OMAPI2C i2c_1;
-};
-
-static void *n800_get_driver(void *object, const char *interface)
-{
-    QN800Machine *machine = object;
-    if (!g_strcmp0(interface, "memory")) {
-        return &machine->alloc;
-    }
-
-    fprintf(stderr, "%s not present in arm/n800\n", interface);
-    g_assert_not_reached();
-}
-
-static QOSGraphObject *n800_get_device(void *obj, const char *device)
-{
-    QN800Machine *machine = obj;
-    if (!g_strcmp0(device, "omap_i2c")) {
-        return &machine->i2c_1.obj;
-    }
-
-    fprintf(stderr, "%s not present in arm/n800\n", device);
-    g_assert_not_reached();
-}
-
-static void n800_destructor(QOSGraphObject *obj)
-{
-    QN800Machine *machine = (QN800Machine *) obj;
-    alloc_destroy(&machine->alloc);
-}
-
-static void *qos_create_machine_arm_n800(QTestState *qts)
-{
-    QN800Machine *machine = g_new0(QN800Machine, 1);
-
-    alloc_init(&machine->alloc, 0,
-               N800_RAM_START,
-               N800_RAM_END,
-               ARM_PAGE_SIZE);
-    machine->obj.get_device = n800_get_device;
-    machine->obj.get_driver = n800_get_driver;
-    machine->obj.destructor = n800_destructor;
-
-    omap_i2c_init(&machine->i2c_1, qts, 0x48070000);
-    return &machine->obj;
-}
-
-static void n800_register_nodes(void)
-{
-    QOSGraphEdgeOptions edge = {
-        .extra_device_opts = "bus=i2c-bus.0"
-    };
-    qos_node_create_machine("arm/n800", qos_create_machine_arm_n800);
-    qos_node_contains("arm/n800", "omap_i2c", &edge, NULL);
-}
-
-libqos_init(n800_register_nodes);

tests/qtest/libqos/meson.build

@@ -52,7 +52,6 @@ libqos_srcs = files(
         # qgraph machines:
         'aarch64-xlnx-zcu102-machine.c',
         'arm-imx25-pdk-machine.c',
-        'arm-n800-machine.c',
         'arm-raspi2-machine.c',
         'arm-sabrelite-machine.c',
         'arm-smdkc210-machine.c',